Year: 2020

Acupressure Can Induce Labor

Are you nearing the end of your pregnancy? Are you eagerly preparing for the arrival of your new baby? Are you also feeling a little anxious at the thought of having a medical induction? Well, you don’t have to. You have probably heard of many tips and remedies to induce labor naturally and I am sure you have come across acupressure. Acupressure can induce labor but not only that, it is also a very effective pain relief method during labor that works without slowing down labor.

The theory behind acupressure is similar to that of acupuncture but without the needles. Acupressure stimulates specific points in the body which in turn stimulates the nervous system to release hormones that start contractions and induce babies head is encouraged to descend and engage earlier.

Is there any evidence that it works? The Complementary Therapy and Medicine Journal published a study in 2005. Women using acupressure went into labor more often and for a shorter time than the women were not using any acupressure techniques.

With respect to pain relief, acupressure not only relieves the pain but also does not slow down labor. This is one of the concerns with using medical pain relief such as epidurals. The Journal of Alternative and Complementary Medicine published a study in 2004. This study showed that by stimulating one single pressure point, labor pain was significantly reduced.

Maternity acupressure is an extremely simple hands-on involves the use fingers and thumbs to apply pressure onto specific, sensitive pressure points on the body called acupressure points. During labor, acupressure can be used to strengthen contractions and help the cervix to dilate. These shortens the labor process.

With simple basic instructions on where the pressure points are and how to apply pressure to them, you can safely use maternity acupressure at home to naturally induce your labor.Acupressure can induce labor and is now a recommended method of self inducing by midwives and health professionals.…

Speed Boat Fuel Saving Hints

A day’s fun with friends or family should always have to be costly. Most argue that since you can afford to purchase a craft, you care less for fuel cost. As an owner, this is not always the case. Here’s how you can save on fuel with your boat:

Fuel saving begins in choosing the correct boat. Forgive me if this sounds like a remedial but this is significant and if you can bear with me here, you’ll see my point. When obtaining a vessel, you must consider the length of the boat and the type of engine it uses. Obviously, length means higher fuel consumption as it is heavier and creates more air and water drag depending on the brand and the purpose. It is important, as a consequence, that you do your investigation on different types of craft. There are not much of them in the marketplace; this ought not to be so hard.

Common conception is, larger engine equals higher fuel intake. Although there is some true to it, what really decides the amount of fuel it consumes is the weight of the load. The guideline is, size your boat the right way founded on the volume of load and the variety of activity that you plan do 75% of the time. Never buy a small one if you are going to panel 10 people on it. A smaller boat with smaller engine is created for a particular number of individuals. Overloading the boat forces the engine to work harder and thus, consuming more fuel. Also, assess if you want a gasoline or diesel engine boats.

Doing the required maintenance not just prolongs the life of your boat, it also keeps the fuel intake at the proper level. Skipping maintenance cycle also cuts down on resale value of your boat and may give you studying the water from the bay instead of on the water enjoying a good summer day.

Don’t bring unnecessary things. These total to the weight and increase fuel consumption. Just bring what you need and remove all those things that you have not moved for years.

Remove things that can lead to air drag and increase water resistance. Convertible tops with sides on as well as hard water deposits and algae decrease fuel economy. Buy as little canvas as possible (without compromising comfort) and remove objects from the hull C objects that shouldn’t be there.

Most producers put standard propellers that are suited for normal operating conditions. Upgrading your propeller to high functioning one made from aluminum or stainless steel can improve the operation of your boat and save considerable fuel. When changing propeller though, invite professional advice on what’s right for your boat.

Saving money on boat is barely half the fight. The other half or the first half begins at the garage. Before leaving, make certain that your trailer is correctly inflated. Under-inflated trailer tires in addition to tires of your vehicle can increase fuel uptake …

Hydrogen Powered Cars – The Fuel-Efficient Cars

Standing on the phase where the fuel depletion is the major problem of all country, Hydrogen Powered cars had come as blessing. Hydrogen Powered Cars are now denoted as cars of the future though it’s invention can be traced back in past. In 1807 Francois Isaac de Rivaz designed the first Hydrogen car but it had some problem and not even patented. Many experiments were taken in this field from then on and finally in 1970 Paul Dieges patented the invention.

Some of the Hydrogen Powered Cars use hydrogen fuel cell while some have converted gasoline powered combustion engine. Fiberforge manufactured the earliest Hydrogen Powered Car; they called it as “Revolution”. Experiment came out as a method of producing ultra-lightweight automobiles using carbon composites. But it too faced many problems. They realized that they have to reduce the weight of the car for better fuel mileage.

There are many big companies in market who want to take advantage of this fuel crisis. Audi, Ford, GM, Honda, Hyundai, Volkswagen, BMW are just few companies who are planning to launch Hydrogen Powered Cars. BMW HR2 claims to be “world’s fastest hydrogen car” exceeding 185mph. It does not operate on fuel cell. It uses modified 6-litre, 12 cylinder combustion engine for its propulsion. While Honda claims to make more efficient fuel cell car that can go 220 miles before it need next refueling as compared to 90 miles per tank limit for the Mercedes. Mercedes F600 Hygenius Concept Car is powered by hydrogen fuel cell and uses regenerative braking to recapture energy and recharge batteries.

In 2005 Honda gave first glimpse of Hydrogen Powered car, FCX, which was not more than a prototype. The car was never placed in the market. Honda is now coming with its new FCX Clarity, which runs on hydrogen and electricity, with light body weight and more interior room. They are planning to place more than 200 cars on road in coming three years. John Mendel, executive vice president at America Honda Motor Company, called on this occasion “an especially significant day for American Honda as we plant firm footsteps towards the main streaming of fuel cell cars.”

Pros and cons: –

Hydrogen Powered Cars are fuel-efficient cars. Chemical energy of hydrogen converted in fuel power in internal engine as it reacts in fuel cell with oxygen. Hydrogen fuel is energy carrier and not the source. Electrolysis of water is being used to produce fuel. The only by product it give is water. Thus it is eco-friendly with zero emission. It will save money on fuel and also lessen our dependence on OPEC. It will increase car performance as well as gas mileage. And to promote these cars, buyers will receive nice tax break.

The Hydrogen Powered Cars face some challenges too. The consumers have to pay huge amount to posses one of these cars. Therefore manufacturers have to use less expensive technology without ignoring the safety measures. There have to …

Top 5 Vehicles For 2010

The global automotive industry is showing signs of revival since the beginning of 2010 after last two turbulent years which witnessed the filing of bankruptcy by auto giant General Motors due to turmoil in the economy. Worst recessionary trends witnessed in 2009 look poised to fade, albeit at snail’s pace, with consumer spending yet to return to normalcy.

The hallmark of the global auto industry is innovation and we have come a very long way from the day of invention of the wheel and powering of the first motor car. Vehicles like cars and trucks no longer portray symbols of status, but have become part of essential necessities in developed countries and ever-increasing list of developing countries.

The major players in the auto industry, including Ford, Toyota, General Motors, Hyundai and Suzuki Motors, have unleashed a range of new models to capture the eye of the consumer, who is holding back his purse strings struggling to fight recession.

What should you look for in a vehicle in 2010?

The technological advancements have changed and redefined the concept of vehicle design. The insistence on high level of safety standards, and adoption of greener technologies, coupled with energy and fuel efficiency has brought the best of the design from the auto manufacturers. Energy conservation, fuel economy, comfort, style and affordability are the major things that an avid customer looks for in a vehicle in the present circumstances.

A new model unleashed by Toyota Motor, the sleek-looking Prius, is one that will catch the eye of the customer. Not only is the car unique in the sense it is a full hybrid electric car, but the looks and style appears pleasing to say the least. Slightly on the higher side, of course, on cost comparisons, Toyota’s Prius would be a serious contender among alternatives for a customer who looks for that little extra style and comfort in addition to fuel economy.

In the luxury class, a host of manufacturers are tying to catch the eye of the customer who values luxury, style and comfort in addition to fuel economy and safety standards.

BMW, the other name for style in automotive industry, unleashed a range of vehicles to the style-savvy customer. The new 2010 BMW 5 series, having the new V8 engine that is capable of boosting 0 – 60 mph in less than 6 seconds, is a serious contender in the luxury brand while not compromising on fuel economy and other interior features.

For the connoisseurs of luxury and style, 2010 Audi 8 model car will be a real teaser. The unique feature of this extravagant vehicle is the splendid interiors made of leather and wood inlays, and acres of comfort for the passengers, in addition to the stylish looks and superior performance on the road.

For the middle and upper middle class and nuclear family segment that is growing at a faster pace in emerging countries, the ideal picks would include Scion from Toyota Motor and Honda …

Getting to Grips With a Warehouse Management System

A warehouse management system, also known as a WMS, facilitates and controls the movement and storage of materials housed within a warehouse. These systems automate transactions and allow stock to be located, quantities of stock to be assessed, and warehouse tasks to be directed.

As a matter of fact, due to the advanced technology of warehouse management systems, all warehousing functions can be optimized. This optimization can include all inventory movements, as well as the provision of all information flowing in between the movement of inventory.

Warehouse management systems are being used by, and are of great use to all types of businesses. While businesses of all sizes use them, small to mid-sized business have been showing a growing interest in these systems. Even though smaller to mid-sized businesses may have less inventory to keep track of than larger businesses may, the streamlining facilitated by a warehouse management system is still of great usefulness to them. These systems allow for the faster movement of product, which in turn improves the bottom line of any business.

The integration of a WMS within an organization results in improved operating practice overall. It allows space within a warehouse to be maximized, and allows for the more effective use of labour, equipment and inventory. Once a warehouse management system is implemented, an improvement in the accuracy of inventory, as well as an improvement in flexibility results. Of course labor costs are reduced, and customer service in enhanced.

The process by which information can be updated in electronic inventory, due to the integration of a WMS results in higher levels of accurate results. The accuracy of WMS results allows for a reduction in the amount of red tape within a business, as well as the altering of inventory information in a streamlined, simple manner.

Captured electronic data can be used for the purpose of monitoring the working practices within a business. This in turn ensures that the merchandise is always replenished when necessary, making the taking of physical inventories unnecessary. Manual data entry can result in errors. However, electronic operations involving warehouse stock through warehouse management systems, results in a greatly reduced rate of error, or even no rate of error at all.

The benefits resulting from the use of such a system can help in allowing a business to become an authority within an industry. Use of a WMS results in the ability for a business to better serve a market, while optimized warehouse management results in an improvement of all facets of an operation.…

HHO Cell Cars – Imagine Feeling Calm When Everyone Else’s Panics When the Gas Prices Rise!

The world has been hearing about the HHO cell car for quite some time now and everyone wants to see it on the roads soon. But the fact is that these cars are already on the streets in many countries in the world like USA. Hydrogen cars have recently been launched by the leading car manufacturers BMW and General Motors. In fact thirteen such cars by General Motors can be spotted in Washington, which also includes six minivans.

Few car manufacturers like Toyota, Nissan, Daimler Chrysler and Honda have designed special hydrogen powered vehicles to be used in the Army. BMW has come up with its own series whereas Ford’s HHO car, “Focus” is still in the manufacturing stage.

You don’t need to worry about gas mileage once you own one of these cars. They help in cutting down on the fuel cost as hydrogen is cheap and affordable. However there is no need to panic if you can’t afford these cars, you can still get your car converted with the help of hydrogen fuel kits. The kit is reasonably priced and it is definitely a good investment considering its long term advantages.

General Motors is planning to launch few alternative hydrogen cars by 2010. These alternative cars are priced like other internal combustion cars but use hydrogen as fuel. There is severe shortage of hydrogen stations all over the world and for this Shell and General Motors have joined hands. Shell has been actively involved in setting up hydrogen fuel stations to meet the demand. The projection is that for every 200,000 cars, the world will need approximately 300 hydrogen stations.

You can notice a few hydrogen buses running in European cities like Amsterdam, Porto, Madrid, Stockholm, Stuttgart and London. They were launched in 2004 by Daimler Chrysler. Such hho cell-powered vehicles are expected to take over the automobile industry in the coming years!…

Inventory Management Software: Your Business Cannot Survive Without This Program – Find Out Why

There are some businesses that simply do not believe inventory management is an important function.

Granted, these are the type of businesses that may have a product that is so effective and is selling so well they figure they can get along with this and nothing else. Understand in order to be successful in business you are going to need other elements.

The use of inventory management software would definitely qualify as one of them. Now why exactly is using inventory management software to implement a good inventory management system so important?

Well first we have to consider the overall health of the supply chain. Any miscalculation in the supply chain or any serious error is going to cause a domino effect that could have serious repercussions for your business.

How do you believe this would affect the long-term health of your business? One way it would affect the health of your business would be financially. In such tough economic times the last thing you can afford are strong financial hits to your business.

If you are not using inventory management software in order to maximize your business, then you are putting yourself behind several other businesses and large organizations.

You have to start thinking like larger businesses and organizations or else fail because larger businesses and organizations are serious about their inventories and they are constantly doing what they need to do in order to maintain optimum inventory. Their goal is to meet whatever requirements they have to.

The purpose is to avoid over or under inventory. Having too much or having too little is going to have a serious impact on their financial figures.

You must think the same way as they do if you hope to compete seriously with them or simply remain in business for a long time.

What inventory management requires and why this type of software can help you and your business succeed in this economy.

In order to be effective with any inventory management system the last thing you can afford to do is become complacent. You may think the system you are currently using is effective, but is it really?

Understand in order to be successful your inventory management system will need constant and very careful evaluation of both external and internal factors.

This is going to require very careful planning and review. Doing things the hard way is going to make all of this very difficult, but inventory management software can solve all of these problems.

Larger businesses and organizations may have people in charge of controlling all of these different functions.

However, with the right inventory management software all of this can be done by one person, assuming they have all the needed information to input into the system.

Making an investment in warehouse management software is just that an investment. You have to think of using inventory management software as an asset, because that’s precisely …

Productivity Benchmarking – A Powerful Tool for Management Teams

Department productivity benchmarking is one of the most powerful and versatile tools available to progressive hospital management teams. Here are just a few of its uses.

As a Cost Management Tool: Labor costs remain the largest single component of any hospital’s expense budget. Managing labor costs is important for both financial and moral stewardship reasons. Department productivity benchmarking is an important first step in identifying and resolving excessive labor costs.

As an Overall Performance Screening Tool: Staffing variances are a marker for potential performance issues that go far beyond excessive labor costs. Departments frequently “staff up” to overcome operating problems caused by everything from organizational cultural issues and resource inadequacies to work process factors. Departments that consume an abnormal amount of labor resources because of these factors are more often than not also struggling with quality, physician and patient satisfaction, employee relations and community image issues. Done correctly, department productivity benchmarking will help identify those departments in the most need of management action.

As a Management Data Set Validation Method: More than sixty percent of U.S. hospitals are managing with inadequate or inaccurate management information. A systematic review of data, performed during the course of the benchmarking process, will identify errors in the management data set leading to better decisions.

As a Change Management Resource: Is your team in the process of building a new organizational culture to meet today’s challenges? Productivity benchmarking serves as an essential component of any serious management initiative to transform the classic hospital culture. Hospitals that routinely and systematically benchmark department productivity are communicating powerful performance expectations with action as well as words.

Modern technology has placed annual department productivity benchmarking within the easy reach of every hospital management team. Major changes take place in the hospital almost every day. How current are your department productivity benchmarks?…

Why Are Multi Fuel Stoves Becoming Increasingly Popular?

In an era when the fuel prices are sky rocketing, one has to have other options in hand to keep the flame burning. Today more people are turning to a multi fuel stove so that they have an option in hand. A multi fuel stove, as its name explains offers various heating options. It burns on a variety of fuels and is not dedicated to just one type of fuel or burning agent. It is more efficient and functional than open fire. The following are a few of the many advantages of using a multi fuel stove.

1. This stove works with equal efficiency no matter which fuel is used. It can burn wood, coal or peat. Thus the user has his total freedom and the flexibility to use his chosen medium for heat or fire. Since you have multiple options, you can use the product that is cheapest at that point of time. For example if wood is cheaper than coal, you can burn wood. Alternatively if coal is cheaper than wood, you can use coal instead of wood.

2. The multi fuel stoves are not just multi functional and have wider applicability, but these are also smart looking. Designed to match your home decor, these come in a variety of designs and also in a range of colors to suit your home furnishes and theme. Thus adding grace and beauty to any given space, the stove is popular for its good looks too. In this competitive world, you can choose from a range of manufacturers, who offer more features at attractive price range to increase their sales compared to others.

3. Most of the multi fuel stoves have a fantastic heat efficiency. The heat is retained for longer period and therefore the amount of source of energy used is also thereby reduced. You need not burn a lot of wood or coal to retain the heat.

4. A multi fuel stove is easy to use. Contemporary designs with easy controls and safe features make these stoves more practical for the present times. The knobs are designed to match the unit and are more practical while in use.

5. Built sturdy, the multi fuel stoves last long. Most of these stoves have a body made of cast iron. Cast iron stoves may take longer time to heat up, but also does not cool fast. Despite of reaching high temperature, these do not bend or give way.…

Warehouse Management System – RFID Gains Significance

Warehouse management is an integral component of supply chain and has assumed significant importance in today’s era. It covers host number of activities under its realm like moving of goods and materials, tracking, picking and packing, maintaining the inventory level etc. The process also involves checking for huge number of boxes along with their product code, packaging no and entering them which being performed manually consumes a lot of time and leads to paperwork.

In a bid remain competitive and harness growth in today’s global environment; companies have started implementing RFID systems in their warehouses. RFID which stands for Radio frequency identification uses radio waves to exchange data between a reader and an electronic tag attached to an object, for the purpose of tracking and identification. It consists of three basic components, viz. RFID tag, RFID reader and the necessary software and hardware for communication. The tag consists of a microchip which is attached to a radio antenna and is placed on the object to be identified. To retrieve the data stored on the tag, An Rfid reader is used which passes information to a computer system put in place for data collection with the help of antennas emitting radio waves. The data transmitted by the tag may provide identification or location information, or specifics about the product tagged, such as price, color, date of purchase, etc

RFID tagging is used in supply chain management as an alternative to bar code technology. Although more expensive to use than the bar code stickers RFID tags don’t get dirty or fall off or require an unobstructed line-of-sight between the tag and the reader. As compared to a barcode reader which demands for clean, clear optics and abrasion free label to be seen by lasers, RFID enables tag reading from a greater distance, even in the harsh of environments. With the help of RFID manufacturers, distributors, and retailers can maintain extremely low levels of inventory and keep a proper track record as to what has been sold in the last business day. Furthermore the system also facilitates automatic data entry rather than manually making entries of the stock on paper first and then into the computer which saves a lot of time and human efforts. The technology possesses the capability of detecting missing shipments and alert the management which leads to a better control over the movement and storage of materials within the warehouse. This also helps in maximizing the efficiency of the receipt and shipment of goods, allowing employees to improve and maintain high customer service levels.

The global world is seeing a constant change and new challenges are emerging within the logistics sector. In a bid remain competitive and tap the growing opportunities. Companies need to bring a change in the traditional style of functioning and implement modern systems and technologies.…