March, 2017 - WallscreenHD

Frame

Welding Supplies – How to Save Money Using eBay Instead of Your Local Welder Supply Store

master7 years ago03 mins

Welding Supplies are not available at every department store. At least not the kind of welding supplies that real welders need.
Lowes, Home Depot, and Tractor Supply, and even Ace Hardware have welding supplies on their shelves, but definitely not everything a serious welder needs.
For Welding accessories like ceramic tig cups, collets, collet bodies, tig torches, flowmeters, and tungsten electrodes, it used to be that you were locked in to shopping at you local welding supply house…until eBay came along.
Supplies like tig welding rods, electrode holders and stick welding rods, are easy to find on eBay… and for a fraction of the cost that your local pacific welding supply welding supply store will charge. You can seriously get hundreds of dollars worth of tig welding consumables for about 20 its the exact same stuff
Remember this one tip when you shop eBay for welding supplies and you will hunt me down and thank me later:
Before you bid on an item, search the completed listings for the item keyword. This will let you know what items like the one you are interested in actually sold for. Not what the current bid is, because remember, that changes by the minute, but what you will see is the actual price something sold even whether is sold at all.
Armed with that information, you can know what to bid on items.
Now thats a good tip. But you need to create an eBay account first, before you are allowed to see the completed supply chain management course auctions. You Might as well do it, you will eventually have to sign up anyway if you decide to buy something.…

Frame

How to Have a Safer Road Construction Environment

master7 years ago07 mins

Construction work sites are full of hazards for workers that have to be accounted for with good engineering controls, safe working practices, and an effective personal protective equipment (PPE) program. On active roadways, road construction crews face additional challenges and hazards. One of the biggest dangers is low light and nighttime conditions that many crews will face. High visibility clothing is just one necessary component for a safe work environment.
There are a wide variety of industrial supplies available that are effective as personal protective equipment and will keep workers safe. It is important that every person is trained and properly uses their PPE at all times so that everyone can finish their shift and go home safe to their families.
Dealing With Low Light And Night Working Conditions
Everything becomes more hazardous at night; even a simple hose lying on the ground becomes a fall hazard. On an active roadway, each passing motorist represents a potential hazard as well. Even with flood lighting, workers need to be wearing high visibility clothing that meets ANSI standards. Regular clothing will allow a motorist to see a worker at around 300 feet, but high visibility clothing extends that range to 1280 feet. This is a key difference, as a vehicle traveling at highway speeds needs about 1200 feet of stopping distance.
For high risk job environments, such as those on an active highway, ANSI class three high visibility clothing is required. This consists of a reflective vest, sleeves, and trousers that outline the human form. For low risk job sites, such as ones that are physically separated from high speed traffic, usually only a reflective vest is required.
High visibility clothing is a requirement for all safe working sites, and it is only a matter of time before it is federally mandated as well.
Industrial Supplies To Protect The Head
Head injuries would classify as another primary concern for construction crews. Anything from a dropped tool to a low hanging beam can cause serious injury to an unprotected head. That is why hard hats should be like a second skin for workers and should be worn at all times when on the job.
Other head protection includes safety glasses and face shields to protect the face and eyes, and ear plugs or ear muffs for hearing conversation. Even a short project can leave a person with hearing damage without noise suppression industrial supplies. Best of all, a hardhat can be outfitted with an attached face shield and ear muffs for all-around protection with just one item of PPE.
Head To Toes
Comfortable, protective industrial footwear is the foundation of a safe worker, literally and figuratively. Steel toe boots can provide complete protection and support for daily activities on the job. The steel plating protects against crushing injuries, non-slip tread helps to eliminate slips, trips, and falls, and a high ankle will cushion against heavy equipment list sprains. For wet environments, including water and chemicals, slip-over latex boots are ideal for adding an …

Metal

Koi Pond Supplies

master7 years ago05 mins

Koi ponds are used to enhance the landscape of your yard and for the enjoyment of those that own them. The sound of the running water brings with it tranquility and relaxation to the landscape. But, maintaining a koi pond takes work. Several things need to be done to keep the pond running correctly and to ensure the health of the koi fish within it. In order to maintain the pond properly, certain supplies are essential to have on hand.
Adding a water feature like a fountain or a waterfall to your pond not only gives the pond beauty, it also plays a vital role in the health of the koi fish themselves. The running water of the fountain stirs the water within the pond and adds oxygen to the water.
The filter is another aspect of the pond that is vital to its overall health. The filter is what removes the unwanted pollutants from the water giving your koi fish the best quality of water possible.
Because koi ponds are so large, a water pump is also needed to aid in the removal of pollutants. Koi pond filters are not strong enough to move the water enough to clean it entirely. And although industrial materials list the water feature stirs the water as well, it is not strong enough to circulate the water enough for the filter to clean it. This is the reason why a water pump is vital to a koi pond.
The quality of the water is very important to the health of the koi fish. There are a couple of essential supplies that should be kept on hand to help maintain the quality of the water.
When the pond’s water level gets too low, you may need to add water to it from the hose. Unfortunately, this will also add unwanted chlorine to the water. In order to combat this problem you should always keep dechlorinator on had to add to the water which will eliminate the harmful chemicals within the tap water.
You should also have a water test kit available to keep track of the water’s pH level and the Nitrate level. These kinds of test kits can be found at you local pet industrial equipment company supply store. If the test shows that the pH or Nitrate level of the water in the pond is off, you can add baking soda or pond salt to the water to regulate it.
Many people choose to build their koi ponds under the shade of a tree. The shade of the tree offers the koi fish protection from enduring too much sun during the day. It also protects the koi fish from bird predators because they have a harder time seeing the koi in the pond as they fly overhead. Although a tree adds these advantages to the pond, it also provides your pond with leaves, twigs and debris. For this reason your should always have a pond skimmer to be able to clean out …

Foundation

Simple Do-It-Yourself Guide For Industrial Machinery Maintenance

master7 years ago06 mins

Often times, people purchasing things like equipment for industry, are having tough times on maintaining it to be in good condition, remain functional and last long. Due to the successive use of the industrial machinery, the performance of the machines can be deteriorated and eventually results in errors and faults. In general, if the machines are not maintained and kept well, productions and other company accomplishments can be compromised and can lead to huge amounts of expenses due to the failure of operations. To avoid this from being happening, below are some of the simple DIY (Do-It-Yourself) steps on how to manage and take care of your industrial machinery:
Keep it in a clean and dry area
Always make sure that the storage area of your equipment for food industry companies is away from areas prone to moisture. Wet areas enable the formation of rust in your machines. Do not forget to use the cover provided during the purchase of the items. This will not only keep your device from being wet and inhibits moist but also to protect it from dust and other particles.
Clean it with a soft brush
If the machine is dusty and dirty, use a soft bristled brush to remove the dirt. You can also use compressed air in tin cans as an alternative to blow away the dusts that stuck on your equipment. It is not necessary to disassemble the parts of your attachments of milling machine machines just to clean it. Remember, there are small and very tiny spare parts there that you might lose if you are not an expert on mechanical field. If you think serious cleaning is needed, try to have it checked and cleaned in motorized shops.
Use right amount of oil and lubricants
Oil and lubricants are used to keep equipment for industry work well. Better follow the proper procedure and instruction in the manual given when you purchase your equipment. Do not put too much oil because residues from the oil will lead to grease that may lead to some accidents.
Buy quality parts
Do not use low quality parts that have not passed the standards. If the machine has defective parts, bring to the shop and let them fix it for you. If you think you can do the fixing, then make sure you have purchased an original and high quality parts to use. Do not be deceived by the parts offered at very low prices. Double check the quality before completely buying those new parts.
Industrial machinery maintenance is not really hard to do. You must have all the necessary information regarding the items and equipment you have purchased. Getting your machine to be maintained and fixed by professional might be costly, however, the guarantee is worth its price. If you have notice some failure on the performance of your machine do not pursue it to work, rather, check it carefully to avoid any possible hazards.
There is no need to panic when the machine …

Frame

A Look at the Top Safety Industrial Products No Worker Should Be Without

master7 years ago07 mins

Many industrial products are designed with worker safety in mind. Every job site contains hazards and potential accidents that can endanger the safety and well being of workers, so utilizing safety equipment is essential. Industrial products for safety are designed to handle specific hazards and to prevent or mitigate certain accidents and injuries.
Matching safety gear and personal protective equipment (PPE) to a job site’s specific hazards is an important aspect of determining the necessary safety industrial products for a given business. In general, the following safety items are found on most job sites and are popular choices for their wide applicability and ability to mitigate hazards.
Protection Above The Neck
Keeping the head, face, eyes, and ears safe is an essential requirement for any worker. Most businesses have a good safety culture that mandates the use of hardhats whenever a person is on the job site. Hardhats are an excellent tool for protecting the head from a host of crushing, impact, and falling hazards.
The hardhat also acts as a platform in which to affix many other industrial products. For protecting the face and eyes, face shields can be affixed and then moved in to and out of place. Finally, ear plugs and ear muffs that can be attached as accessories on a hardhat provide hearing protection.
Preventing Hearing Loss
Hearing protection industrial equipment is a must have for any work site with significant sources of noise. While noisy machines can be quieted to a degree with vibration pads and leveling devices, most job sites are still noisy. When it comes to hearing loss, the damage is often imperceptible, yet permanent and irreversible.
It pays to be proactive when it comes to hearing conservation. If the noise level is painful, then permanent hearing loss has already occurred. Using industrial equipment that can be affixed directly to a hardhat is an excellent way to utilize protective gear. Disposable ear plugs can also be placed in dispensers that are distributed through a site. Sound barriers, vibration controls, and other engineering controls are also helpful in reducing the overall noise level and supplementing PPE.
Daily Clothing Worn On The Job Site
Worker apparel is designed to be a part of effective PPE, even though many people do not realize it. Heavy duty fabrics, heavy rivets, and reinforced seams form a strong barrier against abrasions, cuts, and other minor injuries. However, apparel can also be used to mitigate many other hazards.
Flame resistant clothing can be used to reduce the severity of burns. Normally, clothing can actually cause burns to be worse than they would have been. Cotton fibers can continue to burn, while synthetic fibers can melt onto the skin. Flame resistant industrial products protect workers by either hardening into a layer of insulation when hit with intense heat, or just harmlessly flake away rather than being an ignition source.
Steel toe boots should also be considered standard issue as safety gear. They have a diverse range of protective qualities, including the …

Concrete

How to Create a Home Billiard Room: Which Billiard Supplies Are Absolutely Necessary?

master7 years ago06 mins

If you are thinking about building your own home billiard room, you most likely have a bazillion thoughts running through your mind on how to accomplish this. What colors should I use? Should I get a big pool table or a smaller one? What should I hang on the walls? Are secondary games necessary? Questions like these, along with many others, welding clothing will haunt you when figuring out how to create your very own, perfect home pool room. Perfection is, however, a matter of opinion. Below are some common items you will need to begin creating your home billiard room, followed by a few ideas regarding decorating, although your end “product” should reflect your likes and interests.
Assuming that the room in question is already prepared as far as floor covering, paint, ceiling, lighting, etc., your first thought in your mind should be somewhat need of a pool table. Without the pool table, the pool room would simply cease to exist through practical definition. Figure out what color felt you desire, and decide on pool table features that best suit your personal interests (stain color, leg style, and so forth). Pool tables generally range from 5-9 feet long, and a larger pool table may not be best for a smaller room. Select a table that will fit comfortably in the room, with plenty of space left over for easy movement around the table or for other activities.
Billiard equipment and supplies are next to be considered. Some billiard supplies are just as necessary as the billiard table itself. Included in this list are billiard balls, at least one straight and strong pool cue stick, a racking triangle, and chalk. You should also be safe and purchase an extra pool cue stick in case something happens to your primary cue stick. Other billiard equipment worth mentioning, but not completely necessary, are a pool cue stick rack (a wall-mounted version will save floor space), a couple of different size pool cue sticks and a bridge cue for various longer and shorter shots, a 9-ball rack, and a cue tip sander. Optional billiard supplies that do not hurt to include are extra cue stick tips, a cue stick case, rubber chalk holders and extra chalk, and an extra cue ball.
Once you have bought the necessary billiard supplies listed above, your new home pool room is pretty much ready for your enjoyment. At this point, it will be up to you to determine what billiard room furniture you will want to go with. Some prefer plush furniture, such as a couch or recliners, accompanied by a matching pub table and pub stools. Others like to keep space open, opting for a few bar stools or chairs for spectators and nothing else. Again, many of these decisions may be dictated by your industrial equipment used room’s size, but also remember that you have ample wall space you have at your fingertips, too. Decorative mirrors, neon or felt clocks, light-up neon signs, wall cue …

Wood

Wine Making – Pectic Enzyme Facts

master7 years ago03 mins

Wine making can be a fun hobby for many adults. What many new wine makers do not understand is the additives that must be added in order to make wine. It how to drive a forklift like a pro is not simply fermented fruit. There are bacteria, chemicals, and proteins that must be added as well. Listed below are some of the pectic enzyme facts.
Pectins are complex carbohydrate chains that occur naturally in a fruit’s cellular walls. These pectin molecules are quite large and can form gels. Therefore, when left unattended during wine making, your wine can become hazy and congealed.
Pectic enzyme serves two purposes in wine making. The first being that it breaks down the fruit’s cellular structure. Pectin is located in the cellular structure of the fruit. By destroying the cellular walls, more juice is extracted from the fruit.
Pectin will also cause your wine to be cloudy or murky. Adding pectic enzyme to your wine during the fermenting stage will clear up and thin your wine. This gives you clear and non syrupy wine.
Pectic enzymes are one of the vital additives for your wine making. These enzymes are available from most of your local brewer supply stores or on the list of factory machines internet. It comes in liquid or dry powder form. Prices vary depending on where you purchase the product, but prices start around $2.59 for one ounce.
Making your own wine can be a fun and rewarding experience. There are many kits and books available to help ensure you have the proper additives included.…

Tips for Using

How Effective Is Solar Power?

master7 years ago06 mins

The sun is the source of all our power. A statement not untrue, albeit a little misleading. The sun’s radiation is the origin of all the power sources we use today, affecting chemical changes to create everything from nuclear power to the much greener wind power. But how do we harness the sun’s energy, and how effective is it? A worthy question. After all, solar power is almost eternally available and, most importantly, free.
Applications
In theory, solar power can power everything on earth. In practice, it’s a matter of logistics. Solar power is the conversion of sunlight to electricity through either converting it directly to photovoltaics (PV) or by concentrating solar power (CSP), using it to boil water into steam, which then generates electricity. Since the sun is only emitting radiation on any given point during daytime hours, and is affected by elements such as cloud cover, it needs to be combined with a method of energy storage. Solar power’s potential is vast, and could easily supply all the energy in the world, hundreds of times over. However, the problem lies within the cost. Although the cost is coming down, solar power panels and plants are very expensive to produce.
How it works
The energy released from the sun is radiation – light and heat. This can be harnessed in two ways. Firstly, by using panels containing photovoltaics, which absorb the radiation and convert it into direct current energy. Photovoltaic devices are a type of photodiode, which means photons of light from the sun knock electrons within the device into higher states of excitement, thus generating electricity. The other method is by concentrating solar power by means of mirrors and lenses onto a point, which can then be used to heat up water, converting it to steam and then energy. Think of a kid using a magnifying glass on an ant colony, then magnify that heat (excuse the pun), and you can see what kind of energy can be produced.
Comparisons with other sources
Solar power is still behind fossil and nuclear power sources in terms of power generated, but its benefits for the environment far outweigh its polluting cousins. Water generation, although greener than fossil and nuclear, still requires industrial wastewater treatment technologies dams and can alter landscapes dramatically. Wind power is comparable, in terms of a renewable energy source, but wind turbines can be loud, take more time to install, require maintenance and are more susceptible to weather damage.
Storing types of wood used in mid century furniture energy.
As an intermittent energy source, solar power must be stored if it isn’t to be used immediately. In power plants, the energy is stored either as heat in a heat-retaining material or as pumped-storage hydroelectricity, meaning the energy is used to pump water from a lower reservoir to a higher one. In home-based solar power storage, the solution is usually a series of rechargeable batteries that can store the excess electricity.
Is it a realistic way of powering …

Foundation

Stay Focused and Success at an Auction Can Be Easy!

master7 years ago06 mins

Buying new industrial equipment can be expensive. In fact, not all business owners can afford to acquire new vehicles since this can involve a considerable investment. For this reason, the market for used machinery continues to grow and develop. Furthermore, when being offered for sale at an online auction, industrial equipment can be sold fast and efficiently and is gaining popularity with buyers, sellers and manufacturers.

Helpful Tips

Following are some essential tips to remember before maintenance list template going to an auction of industrial equipment:

Exercise Due Diligence – As much as possible, buyers should be armed with sufficient information before making any bid. Most sellers provide helpful details and information about the item being offered that consumers will want to examine closely.

Bidding Terms – It is important that bidding terms be fully understood such as “as is,” “where is” and other conditions regarding the items being sold. Purchasing property also includes whatever flaws may be present at the time of the sale unless some sort of warranty is offered for damages. It is important to be very careful and know what the equipment’s status before placing a bid.

Bid Only as Appropriate – For whatever reason, something changes to prevent actually closing the deal, bidding should be avoided in order to avoid any penalty charges from being incurred for such an action.

No Emotion – Bidding should not be done with emotion and any bidding wars should be avoided. Instead, stand firm with the price that can be afforded and do not exceed that price. Remember that there is always an opportunity to find the same equipment perhaps in better shape and for a better price.

Determine Condition – At the auction, industrial equipment should be thoroughly inspected. Interested customers may need to arrange a date for the inspection with the seller and take the opportunity to personally see the condition of the item.

Auction Benefits

There are many reasons to consider using this purchasing method maintenance objectives to satisfy business needs. This could include the following:

Growing Online Auction Market – In recent years, business owners have become more and more interested in purchasing industrial equipment from an online bidding company. Every day the demand seems to grow because many goods that are sold online are thoroughly investigated and certified by reputable agencies such as AED and Trade Yard, Inc. This marketing strategy is rapidly growing because of advantageous prices; efficient acquisition of the desired machinery; and a wide range of selection of certain specialized items.

Wide Range of Selection – The wide range of selection of items is another factor why many consumers see that online purchasing of industrial equipment can be beneficial. At an auction, there are both light weight and heavy-duty machines to be found. This includes popular items such as used trucks, cranes, bulldozers, rollers, excavators and many more; there is usually a wide selection of models and manufacturers. Since the available items are specialized and varied, an online bidding site can …

Choosing Material

Swimming Pool Safety – Important to Enjoy Your Pool to the Fullest

master7 years ago03 mins

If you are a home owner who owns and enjoys a pool, it is just imperative that you also possess swimming pool safety equipment all the time, day and night. At present, there are a lot of safety gadgets such as fences and covers that you can utilize in order to ensure full safety for you and family members when enjoying your pool.
If you have an inground pool, you must utilize a special barricade of solid fence to provide safety. Such devices will definitely provide protection to the small kids. Fences will also prevent them from gaining easy access to the pool, especially in the absence of adults. The swimming pool fence is an important safety equipment that effectively keeps your pool safe and secure from any possible accidents. Most types of fences possess gate locks; this makes sure that people, especially the children, are keep outside of the pool.
Aside from fences, there are other pool safety equipment and devices such as swimming pool safety covers, hooks and even nets. Covers are particularly important for use during times when you airgas welding supplies are not using the pool. They are effective in keeping dirt and other debris out of the water. Covers likewise prevent any untoward accident from happening especially to young children.
Simply put, swimming pool safety equipment is but a major protection and life-saving accessory. Owners must utilize such gadgets to ensure the safely of swimmers. Other equipments industries located near raw materials equally important are vests, waist belts, floatation gadgets and goggles. It is a must that these implements are always ready and within reach at all times within the pool area.…