Are All Electricians the Same?

The easy answer to this question is no, all electricians are not the same. This is true on two fronts, firstly each electrician may be a specialist in a particular area, and secondly, every electrician like any other tradesmen or professional have individual skills and personality traits that may make them more or less attractive to you.
For many people, choosing an electrician is as simple as ringing up the first number in the Yellow Pages, but for other more savvy consumers the choice involves a little more research to ensure that they get value for money and the right expertise for the job. It is true that a qualified electrician will be equipped to take on the task at hand with relative ease, but where job is a more complex one you may wish to ensure that the person you’ll be hiring is not only able to perform the job competently but also be able to understand your particular requirements and be able to communicate effectively with you.
Let’s take a look at the various types of electricians which will make your understanding of the trade more complete.
* Household electricians. This group of tradespeople are the most common electricians and will be the ones listed most prominently in local newspapers. They will be qualified to perform most of the jobs you need to have done around the house and will be able to offer a complete rewiring service if necessary.
* Construction electricians. As you would expect, this specialist group of tradespeople work in the housing backhoe names construction area and are normally private contractors who work with developers and builders during the construction of a housing estate.
* Auto electricians. Once again, as the name implies, auto electricians specialise in car electrics and will often be called upon to perform the more complex tasks required during car maintenance or, in some cases, car stereo systems.
* Electrical fitters. This group of electricians usually work in the installation and maintenance of electrical systems in large industrial type instalments. This is a specialist area which requires physical endurance as they may have to work in confined spaces and an unusual hours.
* Maintenance electricians. Maintenance electricians usually work in large factories or manufacturing industrial measurement instruments plants maintaining equipment and removing old equipment and installing replacements.
* Mining electricians. With their natural resources boom in Australia, many opportunities have arisen in mines for specialist tradespeople including electricians. These electricians usually specialise in the types of equipment used in large mining concerns including machinery and underground cabling.
* Electrical engineers. Typically, an electrical engineer is qualified through the completion of an appropriate university degree and is quite separate from the normal electrical tradespeople. They will be involved with the design of electrical installations and will also work alongside other professional engineers in complex electrical services project work.
This brief summary will give you a better idea of how the electrical trade is divided into various specialties and give you an …

Read More

Why Should I Spend My Hard Earned Profits On Safety Supplies?

It’s a pain in the bum

The truth is yes, complying with health and safety in the work place, and spending hard earned profits on safety supplies is a pain in the bum, but in reality, it really is in your best interest to comply, and make sure that your customers and employees are as safe as possible at all times.

Let’s look at some of last years UK work place accident & injury statistics for 2008/2009.

1.2 million People who worked during the last year were suffering from an illness (long standing as well as new cases) they believed was caused or made worse by their current or past work. 551 000 of these were new cases.

180 workers were killed at work, a rate of 0.6 per 100 000 workers

131 895 other injuries to employees were reported under RIDDOR, a rate of 502.2 per 100 000 employees.

246 000 reportable injuries occurred, according to the Labour supply chain management components Force Survey, a rate of 870 per 100 000 workers.

29.3 million days were lost overall (1.24 days per worker), 24.6 million due to work-related ill health and 4.7 million due to workplace injury.

OK, so we can see that a large number of people have been sick at work, been injured at work or even died at work, and yes it is a good enough reason to have all these safety procedures and products in the workplace, but some employees don’t even care about health and safety, and don’t even want to comply, so why should you insist that everything is done by the book?

One simple answer

FINES!!

Yes that’s right fines! That is why it is so important for you to spend all this cash on health and safety in your business. In the long run it actually works out cheaper for you to spend on health and safety. If you don’t it’s only a matter of time before you will end up paying the price, and a big price at that.

You see when it comes to health and safety accidents, death and injury in the work place financially, there is only one loser, and that financial loser is the company that the employee was working for at the time of the accident, injury or death (that is if the company was not doing everything that they possibly could to prevent the accident from happening in the first place, and that they had hard evidence to prove it).

So who can fine forklift advantages the company?

The Employee or Customer – That’s right; the employee or customer can take you to court and take a big chunk from your bank account. These days it is so easy for an employee or customer to take an employer/company to court for even for the smallest accident. These days there are plenty of law companies out there that will have employee/customers backs on a no win no fee basis, and these law firms will obviously be …

Read More

Leather Protective Biker Clothing and Motorcycle Safety Equipment

Having the proper safety equipment on you, your motorcycle, wearing protective clothing, and knowing the does and don’t (s) could save your life. We will focus on these and more throughout this series.
With excessive fuel cost and unemployment on the rise, more people are riding motorcycles. In 2000 almost three thousand people were killed riding two wheel motorized vehicles on road and off. In 2007 these numbers rose above five thousand. Weather was not a factor in 98% of these fatalities. Approximately two thirds of these accidents involved collision with another motorist, most usually a passenger vehicle. Most of these drivers never saw the motorcycle before the collision. A very high percent (98% in 2006) of these riders had little or no professional training. Being self taught, or learning from friends and family.
Protective biker clothing comes in textiles and leather. They not only protect your body from wind and rain, but also from bugs and debris that might fly up from the roadway. Most common protective clothing are jackets, chaps, pants, overalls, and vests. Some of these offer even more protection by padding them in critical areas such as: shoulders, elbows, backs and knees.
Motorcycle safety equipment can consist of (but is not limited to)
Motorcycle helmets-protects your head from serious injury in a fall or spill. Helmets should fit snugly. You should never purchase a used helmet, that might have been in sewage treatment plant motor a previous accident. Always try on a helmet with any accessories that you might add later, such as, goggles, full face shields, sunglasses, and communication devices.
Boots-should be heeled and slip resistant.
Crash Bars- can be attached to both the front and rear of your motorcycle. Crash bars may not welding supply corpus christi only save your bike from damage, but can also help prevent gas spills in a lay down crash.…

Read More

How to Find the Best Industrial Equipment at Auctions!

Getting the best deals from an auction takes much more than the just being the highest bidder. There are many other things that must be taken into consideration in order to purchase something of great value such as industrial equipment. Just like every other business, the purchasing of industrial equipment requires an ability to sort the good from the bad. Otherwise, it would be very easy to buy sub-standard equipment whatever the price and not realize it until nothing can be done about it.

Factors to safety equipment near me Consider

Several factors enter into buying heavy-duty industrial shift in supply curve perfect competition equipment at an auction, some of which is listed below:

Awareness – It is important to be aware of what is going on in the industrial equipment auction world, especially the various dates for auction sales presented by the various auctioneers. Keeping on top of this provides good information about the items being auctioned by various companies at any given time which increases a buyer’s chances of acquiring the best equipment available at such events. Connecting with various auction firms that offer to send out or e-mail information about what is coming up soon can accomplish this simply by signing up for such a service and then monitoring regular mail and e-mail for notifications.

Equipment – It is also important for a purchaser to know the exact type of machinery that is being sought to buy from an auction. It must be know: what type of jobs will be done by the equipment to be purchased; how many are needed; what type; and the amount of money that can be spent on these acquisitions.

Budget – It is important to establish a budget for such purchases to help decide which machines to bid on and which avoid, depending upon the initial expenditure, cost to operate, and maintenance costs to name a few of the important considerations.

Research – To wind up with the right item from an auction, it is important to acquire suitable information about the machinery used in a business. This can be done through research efforts such as reading brochures, equipment manuals, product descriptions, product reviews, magazines, books, journals and information from various media and online sources. Such sources offer guidance on the various factors that accompany the purchase of industrial equipment.

Final Step

The last thing to do in this process is to actually make a bid; however, there is something that goes along with this step – caution. It is vital to be informed about what is being bought. This can be accomplished by following some of the steps listed above and by looking at the ability of the machine to work well in its new work assignment. Maintenance records, date of manufacture and output levels of any auction industrial equipment should be closely examined.

Lack of any of this information could be detrimental; however by becoming knowledgeable about the products being offered for sale, it is possible to gauge whether …

Read More

3 Methods of Coal Mining

Surface mining is used for an estimated 40% of coal production. Used machinery equipment can be used to extract coal. Extracting coal is less expensive if it’s found near the surface. Once coal is extracted, the topsoil is then replaced and native trees and vegetation is planted to restore the original condition. There are three different types of surface mining: contour, strip, and mountaintop removal mining.
1- Contour Mining: Contour Mining is most commonly used in areas that have steep or rolling terrain. It involves digging the earth above the coal supply function from profit line, or coal seam, along the contours of the hilly terrain. This method can be dangerous because it may cause landslides and erosion problems.
2- Strip Mining: Strip Mining usually occurs on flat terrain. The earth is dug up in long cuts or strips until the coal seam is exposed. After the strip has been drilled and blasted and all the coal has been removed, a new strip is created right next to it and the process continues.
3- Mountaintop Removal Mining: Mountaintop Removal Mining involves using a combination of Contour Mining industrial machinery suppliers and Strip Mining. The mountaintops are removed to expose the coal beneath and the coal is extracted.
Underground Mining Methods
If the coal seams are too deep underground, then deep underground mining is necessary. Deep underground mining methods include Continuous, Longwall, Blast, Retreat Mining and Shortwall Mining.
o Continuous Mining: A machine that has a large rotating steel drum with tungsten carbide teeth scrapes coal from the seam. Conveyors are used to transport the removed coal. About 5 tons of coal can be mined per minute. Accounts for about 45% of underground coal production.
o Longwall Mining: A sophisticated machine that has a rotating drum that mechanically moves back and forth along the seam. Loosened coal falls on the pan line which takes the coal to the conveyor belt. Accounts for about 50% of coal production.
o Blast: An older mining method that uses dynamite and explosives to break away the coal seam. Accounts for less than 5% of coal production.
o Retreat Mining: One of the most dangerous coal mining methods. Pillars are used to hold up the mine roof as coal is extracted. The pillars collapse as miners retreat.
o Shortwall Mining: Similar to longwall mining. Uses a continuous mining machine with moveable roof supports. The machine shears coal panels about 200 feet wide and half a mile long.…

Read More

Affordable Industrial Equipment – Finding Cheap Equipment Providers Online

Looking for affordable industrial equipment online? The great thing about the internet is practically all the things necessary in today’s age can be found, researched and bought without even leaving home. The same is true for industrial equipment, considering the amount of providers that currently have their own websites for the perusal of prospective buyers.
The great thing about this is that online stores are usually cheaper, providing affordable industrial equipment compared to those that are based on land. Even better, they have a much wider range of selection that allows individuals to find the perfect equipment that matches their project need. However, this doesn’t mean that just any online store would do. Finding a reputable one that provides affordable industrial equipment is crucial.
That being said, following are some tips industry analysis of food industry on how to find a reputable online store.
Check Out Reviews
Reviews about websites are fairly common nowadays and this is what every individual should look out for before actually visiting a site. One can simply type out the necessary keywords needed to find a summary of industrial equipment online store reviews or look for the store first before looking for a review of it. Either way works as long as the domain checks out wonderfully through several reviews – not just one. The reason for this is that checking out the legibility of a site saves time compared to locating a domain, browsing through their products and choosing one only to find out that the provider itself has bad reviews.
Address, Number types of excavator in dentistry and FAQ
Every reputable online store comes with a land address as well as a landline phone number. This basically ensures that they really do exist beyond the soft address. Aside from this, checking out the FAQ page allows visitors to see how their system works, the payment details and basically the whole process of transacting with the business. This is crucial as some domains accept limited types of payment or delivery methods.
Company History
Exactly how practiced is the company when it comes to providing affordable industrial equipment? Ideally, buyers should go for the ones that have been in existence for a long time since this ensures that they know what they are doing. However, taking a gamble on a new one is not really a problem as long as the necessary back up information ascertaining their reliability is present.
Prices
Obviously, finding affordable industrial equipment necessitates a certain amount of browsing. After having ascertained that the site is entirely legal, then it’s time to check out their products and prices. Be aware that the difference between their price tag may not differ much although this should still count during the deliberation stage. Keep in mind that the goal here is to find quality products at a price that corresponds on what the equipment has to offer.
Of course, there are other ways to stop online stores that provide affordable industrial equipment. Ideally, buyers should …

Read More

Some Variations Of Waste Compaction Equipment Available

There are many varieties of waste compaction equipment. There are large refuse, heavy duty, low emissions, drum and stationary compactors. These can have varying engine, holding and pushing capacities. Conveyors of different inclines, constructions and textures are also available.
Large refuse compactors may be fitted with a tooth type design. These teeth come as one piece and are made of materials that are very strong and resistant to wear. Some models have a 536-hp and the capacity to lift as much as 120,000 pounds. Further, they may be equipped with a 17 foot blade for leveling and can push with a force of 99,000 pounds. Usually these compactors are controlled with an electronic joystick steering mechanism. Load-sensing technology is optional and assists in steering and control of the blade.
Heavy duty compactors are designed for heavy industrial use. They may weigh 11,500 pounds and operate at a pressure of 2400 psi. Its electric motors have a 30-hp. Some models can achieve a 92,300 pound ram force and a 32 second cycle time. Its pump can handle around 63 gallons a minute and the tank capacity reaches 180 gallons.
Drum compactors compact waste considered hazardous or low-level between 55 or 85 gallon drums. Most units achieve a force from 20,000 up to 85,000 pounds. This high efficiency reduces typical disposal costs by up equipment for weighing to ninety percent. Some 55 gallon drums are crushed into three to seven inch thick shapes. This great reduction in volume lowers costs of disposal. Also, it prevents any contaminated containers from being reused.
Low emissions landfill compactors are available. These have modified engines to produce fewer emissions and an increased efficiency cooling system. Engines normally have around 498 net hp at 1800 rpm. The machine runs quietly and produces minimal pollutants. Blades may be programmed to lower automatically when the machine shifts forwards or raises in reverse. This helps further improve efficiency.
Stationary compactors vary in size from one third of a cubic yard to ten cubic yards. The waste is deposited into a large opening, around eighty by one hundred and twenty inches. The large size of industrial machinery columbus ohio this opening allows for exceptionally bulky refuse to be processed. The trash is compacted and stored in containers or transfer trailers. These are then picked up and brought to a disposal site.
Conveyors are available to assist processing waste. These come in many forms and have many unique features. They can be made of stainless steel or carbon. They can be intended for horizontal or inclined positioning, or with a combination of alternative settings. Belts can be made of rubber or of PVC and can be flat or cleated. There are conveyors that are portable and conveyors that are meant for stationary use.
Waste compaction equipment can be purchased in a wide variety. Compactors are created for processing large or heavy refuse. Certain models are designed specifically to handle hazardous wastes. Others are meant to remain stationary instead of maneuvered around with …

Read More

Glass Reinforced Plastic Provides Unbeatable Protection and Durability

In many industrial and commercial industries, such as the gas and electricity sector, where sensitive and valuable equipment is outside or needs protection, there needs to be a durable and safe solution for protecting this equipment. Glass Reinforced Plastic or GRP is a recognised, tried and tested material used by a variety of utility companies for housing gas, water, electricity and telecoms equipment.
GRP is a fibre reinforced polymer. It is made up of plastic reinforced by fine fibres of glass. It is therefore also commonly referred to as fibreglass. It is a particularly strong material that can withstand tension and compression, yet it is surprisingly lightweight. It is also weather resistant so is ideal for outdoor usage. This adaptable polymer can be made into a variety of structures including buildings, kiosks, cabinets, enclosures, and covers. Specific applications include gas meter boxes, odour control covers and septic tanks for the sewerage industry.
As well as being used widely in the utility industries to house all types of equipment, there are many other examples of uses for the material. For instance glass reinforced plastic structures have been used in recent times to protect and conceal important equipment such as electrical transformers, sub-stations, switchgear and motor control centres for major wind turbine projects. It is also often used by the construction industry, railway industry and by petro-chemical companies.
GRP is very adaptable and can be easily moulded to particular design specifications and finishes. For instance it can be produced in a variety of colours and finished with different textures. A heavy-duty ‘textured’ finished is particularly good for outdoor buildings and housings as it won’t scratch, fade or be affected by UV light. The durability of this material also makes it good for long-term industrial usage, with many buildings expected to last for 30 years or more.
It can also be made to blend in to the environment. Natural colours such as greens and browns can be used and the adaptable material can even be moulded to simulate tile or slate roofs, brick and stone. This helps to list of factory machines achieve the look of a real building in an environmentally sensitive area. So as well as blending in seamlessly with the natural environment, it is the ideal material to complement existing structures and brickwork.
Glass-reinforced plastic can also be manufactured to offer premium levels of safety and protection. For instance it can be textured and moulded to prevent vandalism. For certain installations, products made from this material must have undergone fire and explosion tests. This ensures that specialist fire rated kiosks and explosion relief kiosks are provided when needed.
Being so adaptable, it is not just used for housing valuable equipment and products. The material is also used to make fences and flooring, among other things. It is particularly welding supply edmond ok good for anti-slip flooring as it is hard-wearing and provides a good grip. As a fencing material it is corrosion resistant and lightweight, yet extremely tough.
In today’s …

Read More

Basics on Welding

Welding is a process of joining materials such as metals and plastics using heat or pressure. It is the most popularly used method today to join metals, and is used extensively in the production of automobiles, ships, trains, buildings, and bridges. Compared to soldering and brazing which introduce a soft melted substance to hold original pieces together, welding process melts the metals together to form a robust and a strong join.
Welding had been practiced since ancient days. The most popular method during this era was forge welding that cnc machine selection criteria was used by blacksmiths. This method used to weld two metals by beating them together over a hot coal.
Today, the modern technologies have allowed welders to work with much greater precision and achieve stronger welds compared to olden days. The first World War gave the impetus for the development of welding technologies, as many countries were looking for better and efficient ways of welding ships and planes for the war. From there onwards, welding technology developed into indian wood industry a modern art which could be performed manually as well as using robotic machines. In particular, it can be performed under different environmental conditions such as underwater, on-site and in workshops. In spite of these rapid advances, welding seems a highly risky and a dangerous process which can expose a welder to burns, poisonous or toxic gases and even eye damage.
Most common methods of welding practiced today are gas, arc, spot, resistance, electron beam, laser and robot welding.
Gas welding is commonly referred as Oxyacetylene where gas and oxygen are mixed together to produce a high temperature flame at the torch to melt the edges of metal that have to be welded. Hence, Oxyacetylene welding usually requires two tanks or bottles to store oxygen and the fuel acetylene. This method is one of the oldest techniques used and still practiced all over the world. This is mainly because the equipment including storage bottles are easily portable. This is extensively used for joining pipes and simple fabrication.
Arc welding uses an electrical arc between an electrode and the subject material and at the same time melting them together to create a strong bond or a weld. Arc welding is extensively used in industrial applications because it’s economical. The problem with the arc process is that sometimes welds can become brittle and weak due to oxygen and nitrogen present in the atmosphere. To overcome this problem, shielded gas such as hydrogen, argon and helium are used.
Resistance welding uses physical pressure and heat to weld materials. The heat is generated by the resistance of high electrical current passing through the materials that have to be welded. This method is popular among many industrial applications because it is easily automated and economical at high volumes of production. Due to its high initial investment cost it may not be feasible to use on low production volumes.
Spot welding is another form of resistance welding which is used to join …

Read More

4 Tips for Choosing High Performance Alternators

As vehicles are equipping more and more electronics, higher performance alternators are becoming more widely used, especially for heavy-duty vehicles such as:
• EMS vehicles
• Fire trucks
• Highway coaches
• School future of manufacturing 2019 buses
• Industrial equipment
• Trucks
• Marine
There are a number of factors you should take into consideration when you are choosing high performance alternators.
High Efficiency
Look for a high efficiency alternator. High efficiency alternators will use less engine horsepower, which means that more power is being used to run the vehicle and less for powering the alternator. As a result of this more efficient way of using power a high efficiency alternator can save hundreds to thousands of dollars on fuel costs.
Options
Many performance alternators come with a number of options, including:
• Self-excite
• Ignition excite
• Remote sense
Depending on your vehicle and your specific uses, you may require an alternator with some or all of these options. For example, remote sense will prolong your battery life, which is ideal if your vehicle is frequently idling.
Remote sense will prolong the life of the battery by ensuring that the battery is kept fully charged at all times. It does this by using a second wire to read the actual voltage of the battery that comes from the alternator. Remote sense will then signal the alternator to increase output to compensate for the voltage to ensure that the battery always gets adequate voltage. Not only does remote sense prolong battery life, it also reduces battery charge time.
Another option that some vehicles may require is withstanding extreme temperatures. You can purchase performance alternators that are designed to excel under such extreme conditions.
Installation Kits
One benefit to high performance alternators is that they can be purchased as complete installation kits, which makes it easier for you to convert your current system to a higher output and more reliable unit.
Authorized Representatives
When you are purchasing a performance alternator you want to look for an authorized representative for a variety of brands. The more brands that you have access to, the more likely you are to find an alternator that is best suited to your unique needs and specifications. Various brands are designed to suit the needs of specific vehicles, so talk to a knowledgeable representative to help you choose the right brand for you. Some popular brands include:
• Delco Remy
• Prestolite Leece-Neville
• C.E. Niehoff
• Hehr manufacturing process specification Powerline
• Penntex
• EMP
• Denso
• Mitsubishi
• Bosch
• Nikko
• Lucas
• Iskra
It is always a smart decision to go with a reputable brand name because these brands have built a reputation for providing reliable, quality parts that will not let you down when you need them. A local distributor is a great resource to find high quality, brand name performance alternators at affordable prices.…

Read More

Tips for Making Your Business More Eco-Friendly

Society is now more than ever conscious about the effect we are having on the environment. It is therefore up to businesses to embrace best eco-friendly practices and look to the future. Here, we’ve listed some easy eco-friendly processes to implement to make your business more environmentally friendly. From embracing reusable enviro shopping bags to reducing the wastage caused by staff, you won’t want to miss our tips:

Do what you can online- Rather than subscribing to an industry magazine that gets delivered every month, organise your subscriptions to be online and make sure that all subscriptions organised by employees are also delivered to their inbox rather than your businesses mail box.

Switch everything off at the end of the day- Many people simply put their computer into sleep mode, but this doesn’t mean that it’s off. By turning off everything completely, switching it off at the power points you are making sure that you are minimising the total amount of power used.

Re-use where possible- Encourage staff and lead by example 3569 mfg general industrial machinery by reusing the opposite side of old printing paper.

Buy green products- This means everything from recycled toilet paper to recycled envelopes. Make sure all of your cleaning products are also not harmful to birch vs walnut the environment and that wherever possible, you use environmentally friendly products. Encourage staff to do the same when purchasing items for the office.

Get your staff involved- It’s a great idea if you really want to position your company as environmentally friendly to get your staff to participate in a tree planting day or fund raise for a charity.

Have someone in charge of organising car pools to work- If you are located somewhere where people are driving to and from work each day it’s a good idea to organise car pools to cut down on emissions as well as the costs of fuel for your staff members.

Giving employees a chance to work from home- If their job permits working remotely, it is a good idea to give staff the chance once a week or fortnight to work from home. This will not only save on fuel emissions, but also boost staff morale, giving them added flexibility.

Give employees the chance to contribute- Going green should involve every staff member. Give employees the chance to submit ideas on how to make the office more eco-friendly and give out prizes for the most eco-friendly ideas.

Choose the right materials for your promotional items- Make sure that all of your promotional items are made from environmentally friendly materials. For example, if you currently have your logo printed on paper bags, make sure they are made from recycled paper.

Making your business more eco-friendly is easy. By following a few steps you’ll not only be making your contribution to saving our environment but you’ll also be helping to empower your employees and reduce costs all at the same time.…

Read More