Electrical Contractors and More – 3 Ways Industrial Businesses Can Save Money

Manufacturers have had a difficult time, and the current economy certainly hasn’t helped any. In short, they need to save money and use each dollar wisely in order to stay profitable. industrial wastewater treatment technologies This isn’t always easy. However, with a few simple tips industrial businesses can save a significant amount of money while avoiding future headaches and hassles.
Save Money with Industrial Electrical Service and Electrical Contractors:
Bringing in an industrial electrical service doesn’t seem like saving money at first, but its experienced electrical contractors can save manufacturers a significant amount of money. Older equipment works extremely well, but it also pulls a huge amount of electricity and resources every day, needlessly increasing utility bills. To improve the machine’s use of electricity and lower the amount of money the electric company requests each month, call in an industrial electrical service.
A professional provider employs experienced and knowledgeable electrical contractors who are used to working with these types of systems. They will be able to look over the existing setup and identify industrial safety devices any sections that aren’t operating as efficiently as they should. The electricians will make any of the necessary improvements, and the effects will be seen every time the electricity bill comes.
Lower Water Consumption and the Associated Cost:
It is well worth it for manufacturers to review their water usage annually from the start of the process to the end, including the water used in the office and outbuildings. Make a note of where a majority of the water is used and come up with solutions for each area. It might also be worth it to bring in an expert for advice to identify additional solutions and help identify trouble areas.
It may be wise for a manufacturer to consider reusing or recycling some of the water used throughout the process. This could include something as simple as filtering or treating the used water and using it on the front lawn, or using it to spray off dust around the shop.
Keep Technology from Sucking Money:
Technology can suck a large amount of the budget of a business without realizing it. It nickels-and-dimes companies to death. But, there are several ways to save money. Using open-source software and freeware is a great start. Purchase energy-efficient technology, or even consider using laptops instead of desktops, which use 90% more electricity.
Sharing printers can save manufacturers on the initial purchase as well as on maintenance and ink. Outside of the office, consider painting the walls light colors to reduce the amount of lighting needed and put a timer on safety and outdoor lighting to prevent them from running when they aren’t needed.
The first step to boosting profits should always be reducing the current costs as well as making sure the maximum benefit comes out of every dollar. This includes contacting an industrial electrical service to have electrical contractors help as well as assessing water usage and the cost of technology. Once manufacturers discover how much …

Read More

Workplace Safety Recommendations – The Office

In order to make sure your business is operating within the law you will need to adhere to a number of health and safety laws, these laws are an agreement between employers and employees to ensure a safe working environment free from hazards and potential accidents. In many industrial businesses these situations can be more present than others and so you may need to spend a lot of time both training your employees to practice due care but also ensure there are safety equipment and signs to protect them from any accidents.
The office working environment may seem a fairly mundane and safe location compared to the factory or assembly line environment but there are still risks present in the office environment which could equipment management pdf lead to injuries or serious accidents. There are obvious risks such as fires which can happen anywhere but also specific office based issues such as moving furniture or slipping on wet floors.
Some offices may have tiled or lino flooring in kitchen areas or near entrances which when wet can be quite slippery. If it is raining outside then as people enter the building and walk on the floor they will bring in a lot of rainwater which could make the entrance to your office incredibly hazardous if you do not mop it up. Likewise if you spill any liquids in the kitchen area then people could slip and fall there too, therefore it’s important that you either mop up the spill yourself or clearly mark out the area with a sign or note and inform a cleaner or the management about the hazard.
Fire extinguishers are important in an office as computers and electrical equipment as well as plenty of paper which can be fuel to a fire. There are a few different fire extinguishers which may be needed industrial safety devices for an office environment as different types of fire need different types of extinguisher such as wood or paper based fires need different extinguishing material than an electrical based fire.
As well as safety equipment there needs to be some form of organisation when it comes to fire safety in an office environment, most offices will have fire bell tests and even the occasional fire drill where you will have to evacuate your office as a test for when a real fire occurs. A fire safety officer or marshal should instruct employees where to go and to usher them out of the building and to the agreed assembly point. When inducting new employees you should make sure you inform new employees of where their fire assembly point is too.…

Read More

Pool Supplies – A Few Items You May Have Forgotten to Add to Your List

If you are getting ready to have your swimming pool installed then now is the time to begin gathering together your pool supplies. The reason for this is simple and that is that there are inevitably more than you think you will need, and after the pool is done being installed you will definitely want to jump right in.
Extra Sand, Cartridges Or DE
Of course your entire swimming pool will also include a filter system. Do you have replacement filters, sand or diatomatious earth? Even if you do, you will need a safe secure and dry place to store them so everything will be fresh and dry.
A Plastic Container and a Handy Scooper
A nice medium sized plastic trash container with a handy scooper will do. Believe it! If you try keeping sand or diatomacious earth loose in just a bag, in no time at all you will have a mess on your hands. Also filter cartridges need to be kept clean and dry.
Put a First Aid Kit On Your Pool Supplies List
Get a first aid kit because you will be needing it at some point in time. Try as you may to keep the kids calm and safe, eventually one of them is going to come to you with a skinned knee or elbow.
A Nice Big Outdoor Clock
Do yourself a favor and purchase a nice big outdoor clock that you can hang under an eve somewhere in plain sight. The reason is simple and that is that time flies by twice as fast as it would under normal circumstances when the fun is on in the pool.
One Last Item For Your metal industry overview Pool Supplies List
A cheap manual or electric portable air pump will get plenty of use. You just won’t believe how much huffing and puffing it takes to inflate allis chalmers pump even a relatively small inflatable pool toy. On the same subject add pool toys to your pool supplies list while you are at it.…

Read More

Requirements For Tagout Devices – Workplace Safety

The employer’s primary means of providing protection to workers and meeting the requirements of 29 CFR 1910.147 is an energy isolating device. This prevents the transmission or release of energy and locks or tags are attached to it. An energy isolation device could be any of the following:

Circuit breaker

Line valve

Slide gate

Disconnect switch

These devices guard against the accidental startup or unexpected re-energization of machinery or equipment during servicing supply chain explained or maintenance. There are two types of energy isolating devices: ones which can be locked and those that can’t.

Using Tagouts

When a device can’t be locked out, the employer must use a tagout. When using a tagout, the employer must comply with all the provisions of the standard and train all employees. This training must include information on the limitations of tags:

Tags are warning devices affixed to energy isolating devices and do not provide the physical restraint of a lock.

When a tag has been attached, it must not be removed except by the person who applied it.

A tag is never to be by-passed, ignored, or defeated in some manner.

Requirements for Tags

Tags must be legible and easy to understand by employees.

Tags and the means of attachment must be durable and able to withstand environmental conditions of the workplace.

Tags should be standardized according to color, shape or size.

Print and format should be uniform.

Tags must be substantial enough to minimize early or accidental removal.

Tags must be securely attached to the energy isolating device.

The means of attachment must be non-reusable, attachable by hand, self-locking and welding supply houston non-releasable, with a minimum unlocking strength of no less than 50 pounds.

The device for attaching the tag must have the general design and basic characteristics equivalent to a one piece nylon cable tie that will withstand all environments and conditions.

Tags must clearly identify the employees who applied them.

Tags must clearly warn against hazardous conditions if the machinery or equipment is energized.

Tags must contain a clear warning such as:






Full Employee Protection

If the energy-isolating device is lockable, the employer must lock it unless he can demonstrate that the use of tags would provide just as effective “full employee protection.” This includes complying with all tagout provisions plus implementing additional safety measures that can provide a level of safety to that obtained by using lockout. This could include:

Removing and isolating a circuit element.

Blocking a controlling switch.

Opening an extra disconnecting device.

Removing a valve handle to reduce the potential for any accidental re-energization while tags are attached.

Replacing or Modifying Equipment, New Purchases – All Must Be Lockable

OSHA recognizes that there are energy-isolating devices that can not be locked out. However, the standard clearly states that whenever major replacement, repairs, renovations, or modification of machines or equipment takes place, or when new machinery or equipment is installed, the …

Read More

What Are the Most Basic Diabetes Testing Supplies You Need?

Diabetes is a chronic condition that is determined by high levels of sugar in the blood. This occurs because the body either fails to process the sugar properly due to lack or absence of insulin or in some cases when a person’s body is resistant to it. It’s very important to test your blood sugar periodically and you can do this by having diabetes testing supplies ready at all times. The most important equipment you need to manage and handle your working principle of electric forklift condition better is the blood glucose monitor. It is an electronic device that is mainly used for measuring the sugar level in your blood. You only need a small drop of blood to use it. In seconds, the result will be shown on the digital display. Newer meters can show results within 15 seconds. Since the advent of technology to the meters today, managing diabetes is much easier and the pain linked to the disease is tremendously lessened.
Aside from the glucose meter, what other diabetes testing supplies do you need? Of course you need lancing device, lancets and testing strips. A lancing device is a reusable tool that is used with a lancet. You can choose how deep the penetration is into your skin and this should be adjusted according to your finger’s skin’s thickness. A lancet on the other hand is a small medical implement that is similar to a very small scalpel and it has a double-edged blade or needle. Testing strips are mainly used to collect blood sample. These strips contain different chemicals so that when the blood is applied, a small electrical charge is produced between two contacts.
Insulin kits are also one of the most important diabetes testing supplies especially if you are diagnosed with Type 1 diabetes. Some kits are packaged in a glass container that is pre-filled. Purchase a kit that contains some protective wipes, syringes and lancets that redwood for furniture making you use when self-administering insulin. If you are not too comfortable with needles, you might consider utilizing an insulin pump instead. These pumps are usually small in size and are portable. Insulin pens are also great for people who are always on the go.…

Read More

When Riding a Motorcycle Make Sure You Have The Necessary Safety Accessories

Riding a motorcycle comes with a lot of requirements. You often have to attend a motorcycle riders training class and pass a test to ensure that you understand laws and safety requirements of driving a motorcycle.

Beyond the class and the test, the most important way to prepare for your first motorcycle ride is to purchase the necessary safety equipment. There are some motorcycle accessories that are required by law depending on what state you live in. Others are just a smart safety choice that anyone riding a motorcycle should make.

1. A Helmet

Seems like a no-brainer right? Surprisingly many states like Illinois and New Hampshire do not require that those riding a motorcycle wear a helmet. If you are involved in an accident or happen to fall off your motorcycle without a helmet, the injury can be life changing, or even deadly.

When buying a helmet consider:

All helmets sold in the United States are required to have a Department of Transportation sticker on it. This sticker tells you that the helmet meets the required safety standards.

If you are in an accident with your helmet or drop it onto a hard surface that results in a hard blow to the helmet you need to get a new one. Helmets are only designed to take heavy impact one time.

By a helmet with a face shield. This will help protect your eyes and face in an accident as well as your head.

2. Protection For Your Eyes

Think of all the pebbles or debris that hits your windshield while you drive your car. No imagine all of that hitting you in the face and eyes while you’re on a motorcycle. As you can imagine it only takes on tiny rock or pebble to cause a serious eye injury for a motorcycle rider. Wearing a helmet with eye protection or safety goggles or glasses while you ride is the best protection for your eyes.

When choosing eye protection types of excavator in dentistry consider:

Acceptable types of eye protection include: helmet shield, shatterproof glasses or goggles.

Never wear eye protection portland machinery sales that is scratched or dirty.

If you have tinted (daytime) eye protection you will also need clear eye protection to wear in the dark or on cloudy days.

3. Heavy Jacket

Many motorcycle riders resist the idea of wearing a heavy jacket in the warm summer riding months. The heavy jacket is for safety, not warmth.

When choosing a heavy jacket look for these options:

Choose a jacket that is made of a strong fabric or material. Leather, denim, nylon or corduroy are all good options.

Make yourself comfortable and safe by choosing a jacket that is well ventilated but will still keep you safe.

If possible opt for leather. It offers the most protection from abrasions.

4. Be Seen

Other motorcycle riders and car drivers need to be able to see you when you’re on the road.

There are a few things you can do …

Read More

Fire Extinguishers and Other Essential Safety Equipment Belongs in Every Office

Fire extinguishers are a sensible addition to any office or workplace but there are different kinds of fire extinguishers and care should be taken to ensure the right one is bought for your workplace. Powder, foam and water extinguishers are effective for putting out certain types of fires and if you are more likely to experience a certain type of fire. It is best to buy one that is best suited to that fire. The advancement of technology and chemicals means that there are different types and different materials can react in different ways.
A firm should also look into buying fire extinguisher wall brackets and stands to ensure that they remain in place and can be found when they are needed. Quite often an extinguisher will not be used and with any luck, there will never be any need for it to be used but having it in a consistent place is important. If a fire does break out, knowing where to get the extinguisher can save time and this could make the difference between containing the fire or it getting out of hand. Every second is vital in controlling fires so be sure you know where your extinguishers can be found.
It is now possible to buy small disposable fire extinguishers which are ideal for vehicles and small fires. These are very affordable and provide a handy way to extinguish localised fires. It would be dangerous to attempt why manufacturing jobs are important to use one of these extinguishes on a major fire because it would be ineffective and it would require getting close to the fire but for the right type of fire, the small disposable extinguisher plays a great role.
A fire blanket is another good product that can be worth having on your premises as it provides another way to prevent the spread of fires. A blanket will only be suitable for certain types of fires, which further emphasises the need to have staff trained up in fire safety and knowing how best to tackle any situation. If there is any doubt, welding helmets discount all staff members should evacuate the premises immediately and there is no need for anyone to attempt to be a hero. It is easy to see why people would not want their hard work and effort to be wiped out because of a fire but they should not put themselves at risk in trying to tackle the fire. This is what trained firemen and women are for.
Ensure your workforce know where to find these fire extinguishers by using the relevant safety signs and make sure that the work wear they have will protect them as much as possible in this situation, or any other hazardous position they may find themselves in.…

Read More

Dry Ice Blasting Provides a Superior, Safe, Eco-Friendly Cleaning Alternative

Dry Ice Blasting Combats food borne illnesses.
Keeping clients satisfied by supplying quality food products is not only a production manager’s objective but their passion. On top of this, the crucial undertaking of ensuring that your production area is clean and your product is free of food borne illness is essential to the success of your business. The course of action taken to clean and sanitize a production area is tightly regulated by hygiene and sanitation boards across the country and each year more funding is being allotted to prevent, identify and combat food borne illnesses. Currently the Canadian government announced it would invest 75 million dollars to strengthen Canada’s food safety system. Agriculture Minister Gerry Ritz has stated that, “The Government of Canada’s highest priority is the safety of Canadians. We are making significant investments to hire more inspectors; update technologies and protocols; and, improve communication so that Canadians have the information they need to protect their families.”
Currently the most updated technology in place to battle food borne illnesses in the food service industry is Dry Ice Blasting. Dry Ice Blasting removes baked on grime and a multitude of residues from production equipment, assisting in preventing the spread of harmful bacteria such as Salmonella enteritidis, Escherichia coli and Listeria monocytogenes. This fast, ground breaking technology has been proven to decontaminate equipment, and inhibit the spread of bacteria therefore aiding in the task to decrease the amount of food borne illnesses. The process of dry ice blasting cleans food processing equipment by removing protein residue with a blasting stream of Food Grade Dry Ice Pellets. These pellets are ideal for the food and baking industry to aide in prevention measures to decrease contamination during cleaning while eliminating hazardous build up where bacteria and mold can accumulate.
The technique is as follows: The dry ice pellets are propelled at a supersonic speed by a compressed air gun targeted at build up and residues.
Upon impact, the Dry Ice creates a micro-thermal shock (caused by the extreme cold temperature of -78.6ºC), which breaks the bond between the residue coating and the substrate. The high-pressure air stream removes grime directly from the surface, while the Dry Ice Pellets vaporize (sublimate) on contact. The Dry Ice particles are made by turning Liquid Carbon Dioxide into a snow-like substance, then compressed into hard, Food Grade Dry Ice Pellets.
When propelled at high speeds with compressed air, the Dry Ice pellets dissipate manufacturing problems and solutions on contact leaving a dry clean surface and no secondary toxic or chemical waste.
The process itself is applied by a certified contractor or technician on the spot. Other industries use this technique of cleaning because it is quick and is performed on-line without the need for disassembly of equipment. Dry Ice Blasting is non-abrasive; swiftly removing most contaminates without damage to switches, panels, lines, tubes, wiring or belts. The food grade dry ice pellets are non-toxic; and consists of the same substance used to carbonate beverages.
This innovative …

Read More

Modern-Day Metalworking: Examining Cutting Tools Technology

Metalworking has grown by leaps and bounds with the latest in manufacturing technology. Cutting tools and machining processes have evolved to the point where industrial equipment can be made faster and at lesser expense than ever before. These end products are used in every facet of life from the home to the office and in essentially every industry and market. The end result of these advances is to make the manufacturing sector competitive in the global marketplace by providing precision products at the lowest price.
New technologies focus on refining overall production processes. The best way to do so is to combine multiple process steps into one machining operation. Every time materials have to be switched between machines, there is lost time due to loading and unloading along with repositioning and workholding. New working materials and processes helps accomplish the reduction in working steps required for precision products.
Hard Turning And Milling Operations
A common bottleneck in working with hard metals was the need for intermediate working steps. For example, if the cutting tools in use were not capable of working a hard metal, that metal would have to be worked and then heat treated to its final hardness, requiring additional finishing and grinding steps afterward. For example, industrial equipment made from high hardness materials would be worked in an annealed condition and then would be heat treated, requiring further grinding and finishing.
Today’s hard turning machine steps are able to avoid all of that intermediate work. Specialized cutting tools made from polycrystalline cubic boron nitride can turn and mill hardened materials without an annealing step to lower hardness. This particular metalworking breakthrough imparts a number of highly desirable properties into machine components: high toughness, chemical stability, high hardness and high thermal conductivity along with a low thermal expansion coefficient. By removing entire working steps, finished products can come off the line cheaper, faster, and with fewer flaws or off specification rejects.
Hard turning can also supplant grinding in some cases. When this applies, hard turning runs faster than grinding, again lowering both run times and costs.
High Speed Cutting Tools
Many high speed processes were reserved for softer metals as well, such as aluminum. The same issue with annealing and heat treatment also applied for this type of metalworking. But just like turning, new high speed cutting tools can handle harder metals without the intermediate process steps. Again, today’s technology is focused on reducing the per unit cost of all types of industrial equipment.
It might seem counterintuitive, but speeding up metalworking processes actually generates high precision products. Each new step introduces a chance for error, either in part due to human mistakes, improper workholding, machines working outside of specifications, and over working. The ability to cut out intermediate work has a noticeable impact on quality control.
Safety And Reliability – Dry Machining
The polycrystalline cubic boron nitride material’s properties also preclude the need for cooling fluids. This is accomplished due to the ability of the polycrystalline cubic boron …

Read More

A Starter’s Guide to Motorcycle Racing

Motorcycle Racing is an exciting, physically demanding hobby that can be extremely rewarding, as long as it’s practiced with safety in mind. The most important things to consider when you’re thinking about attending your first track meet or racing event is to be sure that you have taken the proper steps to ensure your safety and the safety of those around you.
You should begin by collecting all necessary riding gear. This includes a protective jacket, riding pants, boots, gloves, and a DOT-approved helmet. When shopping for a jacket, find something that fits snugly, but is not restrictive of your movement. It’s important to be comfortable and have a full range of movement, especially with regards to turning your head. Many people opt for a summer style riding jacket, but be warned that many of the lighter, mesh style jackets currently on the market don’t offer the full protection that a full leather jacket provides.
The same holds true for riding pants. You’ll want something with protection on and around all your joints. Kevlar is a very popular material these days, as it provides a great deal of protection in the event of an accident, but is still very lightweight and doesn’t hinder mobility. A comfortable types of food production helmet is also of the utmost important. Try on several different brands and find one that fits your head well and offers you good visibility. The shape of helmet varies greatly from company to company, so you’ll want to visit a motorcycle shop where you can try on several.
In terms of protection, DOT-approved is a must. Look for the small decal on the back of the helmet. After obtaining all of your necessary safety equipment, you’ll want to make sure that your motorcycle is in perfect working order in all areas. Begin by inspecting the tires for any severe wear or abnormalities. Make sure that they don’t have any leaks or punctures, and test for proper inflation. A common mistake many riders make is to overfill their tires, thinking that it offers a more stable ride.
This is absolutely incorrect. Over-inflating a tire leads to a reduction in the available contact patch. This translates into less road-holding grip, which is extremely dangerous. You’ll need to inspect your braking systems as well. If you’re not comfortable doing this, forklift used in warehouse bring it to a licensed professional who can fully test your braking system to ensure that it’s functioning properly. Just because it feels fine on the road doesn’t mean it’s ready for the track. The best piece of advice for a beginning rider is to take it slow!
Don’t rush, and don’t feel pressured to try for impressive lap times on your first outing. Get a feel for cornering and braking techniques and gradually expand your skills as you learn. Following these basic rules will make sure that you have a rewarding and safe experience. Ride safely and enjoy yourself!…

Read More