Tagging Your Equipment – A Quick Guide

As an employer, you have a duty of care to provide a safe working environment for your employees. To that end, you are required by law to regularly tag your electrical equipment to safeguard against electrical faults and electrocution in diy spindle for cnc your workplace. The following will give you a quick rundown of everything you need to know about electrically tagging your equipment. More information can be found by talking to an electrical services company that specialises in tagging.
What do I need to tag?
Any appliances that are designed for connection to a standard low voltage supply (240V) by means of a flexible cord. This includes most appliances such as power tools and equipment, computers and associated equipment, CD players, fridges, microwaves, ovens, televisions, game consoles. Basically anything that is plugged in to a regular power socket will need to be tagged. The tag includes the cord with which the appliance is attached to the power supply
Extension cords and power boards. Anything that current flows across.
Residual current devices (RCDs). RCDs are also known as safety switches. Safety switches monitor the current in a circuit and will switch off in less than 300 milliseconds if any danger is present.
Appliances used under special conditions will be given extra consideration. This includes:
Hostile environments, where the appliance is subjected to any damage, physical or otherwise, or is exposed to corrosive chemicals, radiation, dust or fumes. This will include equipment used outdoors, in kitchens and in workshops.
Portable electrical equipment. This includes appliances that are commonly in movement when they’re being used, such as electrical mowers, floor-polishers and vacuum cleaners.
Portable devices that are often in transit between one location and another. This includes laptop computers, power tools and overhead projectors.
Frequency of tagging
There are a few different rules about the frequency of tagging your equipment. Electrical equipment can become unsafe very quickly if in certain environments. Here’s a quick summary.
Before using any equipment, have it tagged and checked. The manufacturer of the product should, by law, have had the equipment tested and tagged. When the equipment arrives, check it for any possible damage that could have occurred during transit. Use this date as a baseline, from which all other tagging can be scheduled.
Any equipment that has been repaired or serviced must be tested and tagged. Repairs and servicing can create problems in appliances due to occasional mistakes. Have the equipment tagged as safe before putting it back into play.
Environment that the equipment is used in will dramatically alter when you will need to have it tagged.
If the equipment is subjected to abuse or in a hostile environment or even if the cord industrial plant equipment is bent during normal operation, the equipment must be tagged every 12 months.
If the equipment is is under no general stress or in a hostile environment, and if the cord is not flexing during normal usage. the equipment need only be tested every 5 years.
Inspection …

Read More

Industrial Equipment Help: Where to Find Help

If you find yourself investing in a business that requires heavy machinery or industrial equipment, one of your main concerns is finding the best quality equipment at the most reasonable cost. This heavy equipment list is where the debate of purchasing either new or used machinery, or leasing equipment, come in. While each has its own advantages, going for second-hand takes the cake when saving money is involved.
There are still qualms, however, when equipment is deemed second-hand. Am I buying the quality I am paying for? Will it last? Would maintenance cost more than buying brand new machinery?
These are commonly asked questions especially by first time buyers. But the world is not lacking of places and resources to get answers from.
Seeking Industrial Equipment Help
Library. The local library may carry various printed industrial (equipment) help materials. There are many printed resources you can scour in the library for information, including books, magazines, brochures, catalogues, newspapers, newsletters, and journals. There are materials that generally tackle industries or are concentrated on areas such as mining, farming and agriculture, chemistry, manufacturing, food and beverages, refining, biotechnology, and many others. Ask for assistance so that you will find the right kind of information you need.
Professional Advice. There are many people you can approach to ask advice from. You can ask advice or recommendations from the people who are in the same business or supply and demand graph examples. Chances are, they may know a lot about a particular brand or supplier and they can advise you about costs and product quality. If you have already chosen potential suppliers but remain in doubt, you can personally consult with their respective company representatives so you can learn more about their products as well as package deals that will help you save.
Online. There are a lot of websites that offer information, tips, and advice on any topic imaginable. This makes the Internet the perfect, convenient source for industrial equipment help. All you have to do is sit down in front of a computer with Internet connection, and start searching sites (like Google, Bing, or Yahoo!).While this beats lugging books and papers from the library, the task of finding just the right information is far from easy. A patient, critical, and discerning approach is important when researching for topics as broad as industrial equipment, so that the unnecessary is eliminated and the essential is allowed to take root.
A Word Before Making the Purchase
After seeking industrial equipment help and learning about options that will help you save money and maintain solid profit, it’s time to finalize your choices. All hard work and preparation will be wasted if you are not mindful of a few pointers before making that payment.
First, did you visit the product or the reselling establishment and made sure that they are professionals in the field? While online companies only have the best intentions for consumers, they are mostly just resellers who may have little expertise when it …

Read More

Commercial and Industrial Equipment Leasing Solutions

Canadian business benefits from commercial leasing and industrial equipment leasing when it comes to asset acquisitions for growth and profits.
As a small or medium sized business owner in Canada you do not want to deplete your cash resources. We would point out that larger, even public corporations in Canada have that same pressure, because when they report to shareholders the focus of their investors and shareholders is often cash flow growth and preservation.
Business owners and financial managers in Canada look to lease financing as an alternative to taking on bank term debt. Canadian chartered banks do not provide lease financing; they structure your asset acquisitions as loans which supplement your existing borrowing arrangements with the bank.
Quite often, as with any asset acquisition, its all about the monthly payment and more often than not you will find that the lease financing solution provides you with the lowest monthly payment, and in many cases you can arrange that payment to reflect your actual working capital situation – i.e. seasonal payments, skip payments, quarterly payments (if desired) etc. That is true flexibility.
Most lease financing solutions in Canada are at a fixed rate, but in some cases variable rates are also offered.
When clients ask us what are some of the major challenges or pitfalls of equipment leasing and financing we advise them that questions can be answered in a very simple manner – business owners need to focus on which benefits of lease equipment financing appeal to them and then work with a partner who can deliver optimal rates, terms and structures based on your firms overall credit quality.
The challenge for Canadian business is working through the plethora of hundreds of equipment finance firms, many of which may not be suited to your type of asset acquisition and your firms overall credit quality. In Canada rates on equipment leases depend on the size what is the saddle on a milling machine the of the asset, the financial strength of the leasing company (they borrow money too!) and the overall credit quality of your firm. Leasing when it comes to pure interest rate focuses on your ability to generate future cash flows to make the monthly payment.
Thousands of leases are written every year in Canada for commercial, industrial and construction equipment when the historical cash flow of a customer does not necessarily reflect the future ability to pay. In that case the lease becomes what is known as ‘structured ‘, which simply means that a down payment might be required, the term of the lease might be shortened, and in some cases some additional collateral might be required Lease firms are in business to write leases, so usually every effort is made to complete a transaction that makes sense for all parties.
We advise customers to work with a credible, experience and trusted advisor in this area who can help your firm navigate the occasionally complex world of equipment financing in Canada. When you are successful you will …

Read More

Industrial Equipment Supplies 101 – Spring Plungers and Spring Loaded Devices

Springs are an important tooling component for providing tension and are an all around useful example of industrial equipment supplies. However, those little metal coils can be impractical to work with due to their small size, fragility, and tendency to slip out of the hand when under tension.
Spring plungers and spring loaded devices solve these issues by encasing the coils in a threaded body. These industrial products are then able to provide accurate tension forces in a robust component that is easier to install and has a longer service life. Let’s take a look at how these industrial products work, their installation, and the different materials used to diversify their application.
Inside Of Spring Plungers
This class of industrial products uses a threaded housing and plunger assembly to enclose a spring. This design protects the coils while adding strength and stability to the entire piece. The plunger and housing design allows these welder supply cable industrial equipment supplies to outperform standard components by creating a precise end force with positive and controlled tension. Gone are the days of a spring under tension slipping away and being launched across the room.
The plunger assembly contains a polymer, usually nylon, locking element that holds the plunger in place. The coil is attached to one end of the plunger while the other end allows for regulation of the coil motion. This setup prevents lateral motion, similar to axial bearings, in order to prevent damage and poor operation while simultaneously ensuring reliable linear motion. During installation and servicing, tool forces are applied to the casing rather than a bare coil held under tension.
Overall, this design surrounding the coil increases the serviceable lifetime of this class of industrial equipment supplies while offering improved performance through consistent tension forces.
Installing And Using
Thanks to the threaded casing design, installing these products is significantly easier and quicker than working with bare coils. The assembly is easier to handle since bare springs have to be held under tension while being installed. On the other hand, spring plungers can be locked into place.
Spring loaded devices can even be installed with just a hex key wrench or screwdriver, but it is preferable to use a specifically designed spring/ball plunger wrench. The right wrench will speed up an already quick installation. Either way, be aware that spring loaded devices are hollow industrial products. They have a significantly lower torque resistance than a solid body screw or bolt. Exercise caution and refer to the manufacturer’s instructions when applying torque forces. Otherwise, over-tightening a spring plunger can lead to snapping the casing or deforming the component into an unusable shape.
The locking element described above is included in many spring loaded devices, and this assembly will compress against the threads of a tapped hole when installing. When working with soft metals, like brass, bronze, copper, or aluminum, or soft plastics, be careful not to damage the tapped hole. The force can easily deform soft materials. There are industrial equipment supplies …

Read More

3 Methods of Coal Mining

Surface mining is used for an estimated 40% of coal production. Used machinery equipment can be used to extract coal. Extracting coal is less expensive if it’s found near the surface. Once coal is extracted, the topsoil is then replaced and native trees and vegetation is planted to restore the original condition. There are three different types of surface mining: contour, strip, and mountaintop removal mining.
1- Contour Mining: Contour Mining is most commonly used in areas that have steep or rolling terrain. It involves digging the earth above the coal supply function from profit line, or coal seam, along the contours of the hilly terrain. This method can be dangerous because it may cause landslides and erosion problems.
2- Strip Mining: Strip Mining usually occurs on flat terrain. The earth is dug up in long cuts or strips until the coal seam is exposed. After the strip has been drilled and blasted and all the coal has been removed, a new strip is created right next to it and the process continues.
3- Mountaintop Removal Mining: Mountaintop Removal Mining involves using a combination of Contour Mining industrial machinery suppliers and Strip Mining. The mountaintops are removed to expose the coal beneath and the coal is extracted.
Underground Mining Methods
If the coal seams are too deep underground, then deep underground mining is necessary. Deep underground mining methods include Continuous, Longwall, Blast, Retreat Mining and Shortwall Mining.
o Continuous Mining: A machine that has a large rotating steel drum with tungsten carbide teeth scrapes coal from the seam. Conveyors are used to transport the removed coal. About 5 tons of coal can be mined per minute. Accounts for about 45% of underground coal production.
o Longwall Mining: A sophisticated machine that has a rotating drum that mechanically moves back and forth along the seam. Loosened coal falls on the pan line which takes the coal to the conveyor belt. Accounts for about 50% of coal production.
o Blast: An older mining method that uses dynamite and explosives to break away the coal seam. Accounts for less than 5% of coal production.
o Retreat Mining: One of the most dangerous coal mining methods. Pillars are used to hold up the mine roof as coal is extracted. The pillars collapse as miners retreat.
o Shortwall Mining: Similar to longwall mining. Uses a continuous mining machine with moveable roof supports. The machine shears coal panels about 200 feet wide and half a mile long.…

Read More

Glass Reinforced Plastic Provides Unbeatable Protection and Durability

In many industrial and commercial industries, such as the gas and electricity sector, where sensitive and valuable equipment is outside or needs protection, there needs to be a durable and safe solution for protecting this equipment. Glass Reinforced Plastic or GRP is a recognised, tried and tested material used by a variety of utility companies for housing gas, water, electricity and telecoms equipment.
GRP is a fibre reinforced polymer. It is made up of plastic reinforced by fine fibres of glass. It is therefore also commonly referred to as fibreglass. It is a particularly strong material that can withstand tension and compression, yet it is surprisingly lightweight. It is also weather resistant so is ideal for outdoor usage. This adaptable polymer can be made into a variety of structures including buildings, kiosks, cabinets, enclosures, and covers. Specific applications include gas meter boxes, odour control covers and septic tanks for the sewerage industry.
As well as being used widely in the utility industries to house all types of equipment, there are many other examples of uses for the material. For instance glass reinforced plastic structures have been used in recent times to protect and conceal important equipment such as electrical transformers, sub-stations, switchgear and motor control centres for major wind turbine projects. It is also often used by the construction industry, railway industry and by petro-chemical companies.
GRP is very adaptable and can be easily moulded to particular design specifications and finishes. For instance it can be produced in a variety of colours and finished with different textures. A heavy-duty ‘textured’ finished is particularly good for outdoor buildings and housings as it won’t scratch, fade or be affected by UV light. The durability of this material also makes it good for long-term industrial usage, with many buildings expected to last for 30 years or more.
It can also be made to blend in to the environment. Natural colours such as greens and browns can be used and the adaptable material can even be moulded to simulate tile or slate roofs, brick and stone. This helps to list of factory machines achieve the look of a real building in an environmentally sensitive area. So as well as blending in seamlessly with the natural environment, it is the ideal material to complement existing structures and brickwork.
Glass-reinforced plastic can also be manufactured to offer premium levels of safety and protection. For instance it can be textured and moulded to prevent vandalism. For certain installations, products made from this material must have undergone fire and explosion tests. This ensures that specialist fire rated kiosks and explosion relief kiosks are provided when needed.
Being so adaptable, it is not just used for housing valuable equipment and products. The material is also used to make fences and flooring, among other things. It is particularly welding supply edmond ok good for anti-slip flooring as it is hard-wearing and provides a good grip. As a fencing material it is corrosion resistant and lightweight, yet extremely tough.
In today’s …

Read More

How To Choose The Right Bearings: Industrial Bearings And More

Producing food products is a demanding science. All of the industrial supplies and equipment that are used to manufacture foodstuff has to meet stringent requirements of quality and sanitation. When it comes to industrial bearings, the food industry has to look at unique options. For instance, would you want lubricating oil to contaminate food on the production line? Or what if bacteria were to grow in a machine’s housing? Consumers would be put off to say the least.
While industrial bearings have to be carefully chosen in terms of cleanliness and sanitation, they also have to be evaluated in terms of strength, hardness, durability, and cost. It takes a special set of materials that can meet all of those criteria.
Choosing Industrial Bearings And Inserts
The balls and rings themselves have to be made from high performance materials; regular iron will not meet the required FDA and USDA standards. A common choice within industry is to use stainless steel balls and rings. They combine high tensile strength with good corrosion resistance and will not contaminate food. However, they are one of the most expensive options, so other materials have been designed as balls as well.
Plastic blends and can be utilized by themselves or with stainless steel, especially in plain or non-rolled style industrial bearings. Coated iron is a less expensive option as well. A chrome coating will improve the balls’ hardness and corrosion resistance and increase their durability. Zinc coatings are also common for improving corrosion resistance and preventing contamination.
Housing Materials
Industrial supplies, like machine housings, also face strict standards since they will come into contact with food products during the production process. In general, housings have to be smooth surfaces to facilitate cleaning and help prevent the buildup of germs and bacteria that can occur in rough or porous materials. Polished housings are very common, and there are also anti-microbial coatings that can help protect industrial supplies and housings.
When considering materials of construction, housings are also typically stainless. The combination of strength, durability, and corrosion resistance is required. Industrial supplies in the food industrial equipment company will be subjected to acidic and caustic wash downs and cleanings, along with oils and other organic materials from the ingredients themselves.
Again, less expensive options are available. Plastic and polymer blends are also chemically inert and will resist cleaning solutions and food products. Plastics can be created with high tensile strengths and smooth surfaces. Coated iron is also applicable for housings. A nickel or Teflon coating will go a long way to preventing corrosion and contamination.
Industrial Bearings raw materials used in engineering industries And Lubrication
Using conventional oils and lubricants is clearly forbidden in the food processing industry. Lubricant contamination will spoil food, create a horrible taste, and is toxic if consumed. Always use FDA and USDA-approved greases for the food industry. These lubricants are called ‘H1’s’ and are free from odors and tastes and are nontoxic if any contamination occurs with the food being processed. H1 is …

Read More

10 Safety Tips When Using Belt Sanders

Compared to a bladed power tools like circular saws, powered belt sanders are far less intimidating to use and are much safer. Despite this users should be aware that a belt sander is still a very heavy piece of equipment that has a lot of power. It can be very dangerous if general and specific instructions are not followed carefully. Here are 10 safety rules to keep in mind when operating a belt sander or any power tools.

Keep your work area clean, well lit and clear of any debris. Clean any accumulated dust particles welding supplies from ioc reviews or flammable liquids. Belt sanders can cause sparks which can ignite the dust or fumes.

Do not carry the power tool by the cord it can cause the cord to rip and become exposed. If the cord is damage or expose replace it immediately.

Avoid wearing any loose clothing, jewelry or watches that may get caught. If you have long hair tie it up or keep it contained.

Wear Safety equipment. Wear eye protection, dust mask, hearing protection and a hard hat for all appropriate conditions. Regular eye glasses and sunglasses do not count as eye protection.

Make sure the belt sander is turned off before plugging it in. Do not plug in the sander with your finger the power switch. The sander can get away from you quite easily when you are not ready.

Do not expose the sander to rain or wet conditions.

If the sander comes with a dust bag make sure it is attached securely to the spout.

Use a clamp or some other practical way to secure the work piece to a stable table. Using your hand or holding it against your body is not a safe method. It can cause the piece to fly away causing serious damage to your work and yourself.

Do not overreach when sanding it can cause you to lose balance and fall over. Always keep proper balance, keep both hands on the belt sander and move with your sander for better control and remember to wear proper footwear.

Be alert when using any power tool or heavy equipment. Do not operating while under the influence of medication, drugs or alcohol.

There are more safety rules that can be listed but I have list the 10 that I feel relate more directly with belt sanders. Portable power tools and industrial equipment used any hand tools are an essential part of everyday life. Following safety procedures and using the tools safely will make our life easier and safer.…

Read More

The Benefits Of Using Food Industrial Products That Improve Safety And Efficiency

Every worksite needs to be clean and orderly in order to function safely and productively. Sanitation is especially important in the food product manufacturing industry. Federal laws and standards are explicit and stringent in mandating how food products are manufactured with specifications on industrial equipment and industrial supplies used in this industry. When it comes to producing foodstuffs, any contamination from bacteria or even dirt can cause health problems for end consumers.
In order to meet sanitation requirements while also maintaining a safe and effective workplace, there are a wide variety of industrial supplies designed to be utilized in this setting. Food compatible industrial equipment is designed to handle products safely while promoting a sanitary environment. In the end, utilizing the right products empowers companies to excel.
Materials Used In Food Grade Industrial Equipment
Typically, manufacturers in this field utilize a common set of materials for process machinery. Sanitation properties are essential when designing production lines in addition to typical design concerns. For exposed surfaces on working machinery, smooth and polished materials are utilized. This type of surface is easier to clean and does not promote the growth of bacteria like a rough surface would. The most common way to achieve this specification is with the use of polished stainless steel.
However, stainless steel can be cost prohibitive for certain pieces of machinery. Polymer and plastic blends can also be utilized as long as they are smooth and polished. Another option incorporates standard carbon steel with a zinc or chrome plating to keep costs low while maintaining a smooth surface. Anti-microbial coatings and even Teflon can be applied for additional prevention of contamination.
These materials are in common use for the food wood elements for another reason. While corrosion is a problem in any industry, when handling food items, rust presents additional problems. Metal contamination will cause food to take on an unpleasant taste, odor, or color as well as putting toxic materials into finished products. A strong corrosion resistance is also necessary in order to withstand alkaline washing solutions and acidic ingredients.
To make matters more complicated, industry equipment used in this field may also be used in high or low temperature production steps. High temperature baking, cooking, or frying as well as low temperature freezing and preserving process steps create significant temperature swings. Industrial supplies have to be selected that will perform at low and high temperatures in addition to room temperature.
Essential Industrial Supplies: Food Grade Lubricants
Every moving part on a machine requires lubrication, but conventional oils and greases are incompatible with food products. If these lubricants contact goods on the production line, the resulting products will be off color, off taste, and toxic when consumed. Of course, lubricants are still required for process machinery, so food grade materials have been designed to keep industrial equipment running without contaminating products from incidental exposure.
These lubrication solutions are made to be odorless, colorless, tasteless, and non-toxic. They are rated for incidental contact with foodstuffs without causing harmful …

Read More

Lockers and Storage

Children’s education is not always found in school books always thought in school. There are practical lessons that can be learned even from doing simple chores like cleaning a cabinet or drawers. Children learn how to organize themselves and manage their personal belongings and affairs. Children who are able to do this will grow up to be responsible individuals. Thus, parents should encourage their children to organize their clothes, toys and books. They should provide them their own cabinets where they can store and organize their personal items. Somehow this could be the beginning of their training to accept responsibility and value it dearly.
Similarly, day care centers that will take in the children for their first education should continue this training. They too should put up lockers and storage for children’s personal belongings. Children should be encouraged to leave their school bags in these lockers together with their coats. This industrial electric indianapolis teaches them to organize their affairs at an early age. Day care teachers should find it convenient that the children can do chores by their own. They no longer need to remind the children what to do. Responsible students will just go straight to their lockers and leave their belongings there.
Ideal lockers and storage for use of children should be stylish and durable. Its design should take into careful consideration the children that will be using it and blend with the other classroom manufacturing process sheet format furniture. These furniture should also ensure the safety of the children while they are using it. As such, these should be made from good quality materials and should withstand use by children.…

Read More