maintenance - WallscreenHD

Frame

Maintenance of Welding Safety Goggles

master5 years ago05 mins

Welding goggles are made to protect the wearer from facial and eye injury caused by flying shrapnel, heat or harmful radiation. It is necessary that this protective device is cared for and maintained according to the manufacturer’s guidelines. It is also important to carefully inspect them on a regular basis for scratches, cracks and other defects and to test their comfort when worn. Defective goggles will reduce the efficiency of the goggles and might not only lead to a poor weld but could potentially be a source of grave injury to the welder.
The choice of material used in the manufacture of the goggles will determine what kind of maintenance they would require. Goggles made of anti scratch (hard coated) lenses are less liable to scratch.
In caring for welding goggles, a few basic procedures need to be observed. For instance cleaning the welding goggles should be done on a daily basis to rid it of slag and dust. Cleaning can be done using a clean cloth or as specified by the manufacturer. Dirty lenses will impair vision and lead to errors in the weld.
Lenses that are scratched weaken the shade power of the goggles and lead to exposure to dangerous ultraviolet rays, infrared and bright lights. They reduce the classification of milling machine vision of the wearer, which can also lead to a weak weld. Therefore it is important that welding safety goggles are handled with care to prevent scratching.
The storage of welding safety goggles constitute an important element in caring for your goggles. How they are stored will go a long way in determining their lifespan. Safety goggles should be stored in a dry, clean place and should be kept in a soft case when they are not in use so that even if they should fall, they will be in their protective case and kept safe from damage. Poor storage of the welding goggles will lead to scratches on the lens surface and a weakening of the shade power of the lens.
If for some reason, the welding safety goggle should get damaged, the damaged part should promptly be replaced with an original and identical part from the manufacturer. Failure to replace damaged parts impairs the efficiency and reduces the safety element of the goggle, resulting in potential eye damage for the wearer.
From time to time, goggles should be disinfected using a general disinfectant. On the other hand, they could marx capital chapter 15 summary either be placed at 100 degrees C for about an hour or in an ultraviolet light germicide chamber.
According to OSHA (Occupational Safety and Health Administration) 29CFR1910.133, it is the duty of the employer to clean, disinfect and store safety goggles. It is also the employer’s duty to inspect the goggles for cracks, scratch and other defects and carry out repairs or replacement accordingly. If you work with welding safety goggles however, you should take it upon yourself to regularly check any goggle you wear. Your eyes are your …

Material Endurance

Fire Fighting Equipment Maintenance and Its Importance

master5 years ago05 mins

Fire fighting equipment protects people and businesses during fire accidents. It keeps people safe wherever they live and work. Regular inspection and servicing of the equipment meant for the safety of the occupants to the relevant standards is very crucial. Daily, weekly, monthly, quarterly and annual inspections are done to ensure the equipment’s functionality, and maintain all other aspects of fire safety management.
Trained personnel need to involve in the checking of fire fighting equipment, which is usually provided by the installer, or the installer’s agent, or even by a servicing organization. The equipment includes fire detection and alarm systems; emergency and escape lighting systems; sprinkler systems; fire door hankison dryer parts automatic release mechanisms; portable fire extinguishers; gaseous, foam and powder extinguishing systems; smoke control systems including systems using pressure differentials; evacuation lifts for persons with disabilities; fire hydrants; hose reels; fire mains; fire doors, and other related things.
Fire Safety Equipment Maintenance Plans
The Standard plan provides regular round-the-clock maintenance and call-out services. The Standard Plus plan, in addition to the services provided in the Standard plan comprises initial service of new fire safety equipment, its disposal, and charges of minor parts and refills. The comprehensive plan covers all the engineers, attendance charges, and services of the Standard Plus plan. However, the charges are not covered in the case of the equipment being damaged by users, or third parties, or natural calamities. Replacement of all major parts is chargeable under all the plans.
Services Offered
A yearly basic service is done for the maintenance of fire fighting equipment. Safety clip and indicating devices are inspected to find out whether the fire extinguisher has been operated. Pressure indicating devices on stored pressure extinguishers are checked to see if the pressure limits are within needs of manufacturing industry normal ranges. The body of the fire equipment is examined for corrosion, dents or damage. The hose, horn and nozzle are checked. The equipment is weighed for loss of contents. Operating instructions are verified for accuracy and legibility. Gas cartridges in appropriate extinguishers are inspected.
An extended service includes the basic service and the discharge test. The fire fighting equipment is discharged under controlled conditions to test its working efficacy. Its internal body is examined for corrosion or lining damage. If it is in a good condition, then it is refilled, recharged and returned to service. The extended service is done once in five years for water, foam and powder based extinguishers, and once in ten years for primary seal powder extinguishers. An overhaul service interval for CO2 extinguishers is ten years. The maintenance record of the service should be affixed to the fire fighting equipment.
The basic requirement in any premises is the presence of a fire fighting equipment in a good operating condition. The regular maintenance checks with a suitable plan are highly essential. The equipment has to be maintained to fulfil the relevant standards and conditions according to the Regulatory Reform Order 2005. This ensures safety of people and …

Concrete

Simple Do-It-Yourself Guide For Industrial Machinery Maintenance

master6 years ago06 mins

Often times, people purchasing things like equipment for industry, are having tough times on maintaining it to be in good condition, remain functional and last long. Due to the successive use of the industrial machinery, the performance of the machines can be deteriorated and eventually results in errors and faults. In general, if the machines are not maintained and kept well, productions and other company accomplishments can be compromised and can lead to huge amounts of expenses due to the failure of operations. To avoid this from being happening, below are some of the simple DIY (Do-It-Yourself) steps on how to manage and take care of your industrial machinery:
Keep it in a clean and dry area
Always make sure that the storage area of your equipment for industry is away from areas prone to moisture. Wet areas enable the formation of rust in your machines. Do not forget to use the cover provided during the purchase of the items. This will not only keep your device from being wet and inhibits moist but also to protect it from dust and other particles.
Clean it with supply chain management degree a soft brush
If the machine is dusty and dirty, use a soft bristled brush to remove the dirt. You can also use compressed air in tin cans as an alternative to blow away the dusts that stuck on your equipment. It is not necessary to disassemble the parts of your machines just to clean it. Remember, there are small and very tiny spare parts there that you might lose if you are not an expert on mechanical field. If you think serious cleaning is needed, try to have it checked and cleaned in motorized shops.
Use right amount of components of excavator oil and lubricants
Oil and lubricants are used to keep equipment for industry work well. Better follow the proper procedure and instruction in the manual given when you purchase your equipment. Do not put too much oil because residues from the oil will lead to grease that may lead to some accidents.
Buy quality parts
Do not use low quality parts that have not passed the standards. If the machine has defective parts, bring to the shop and let them fix it for you. If you think you can do the fixing, then make sure you have purchased an original and high quality parts to use. Do not be deceived by the parts offered at very low prices. Double check the quality before completely buying those new parts.
Industrial machinery maintenance is not really hard to do. You must have all the necessary information regarding the items and equipment you have purchased. Getting your machine to be maintained and fixed by professional might be costly, however, the guarantee is worth its price. If you have notice some failure on the performance of your machine do not pursue it to work, rather, check it carefully to avoid any possible hazards.
There is no need to panic when the …

Foundation

Simple Do-It-Yourself Guide For Industrial Machinery Maintenance

master7 years ago06 mins

Often times, people purchasing things like equipment for industry, are having tough times on maintaining it to be in good condition, remain functional and last long. Due to the successive use of the industrial machinery, the performance of the machines can be deteriorated and eventually results in errors and faults. In general, if the machines are not maintained and kept well, productions and other company accomplishments can be compromised and can lead to huge amounts of expenses due to the failure of operations. To avoid this from being happening, below are some of the simple DIY (Do-It-Yourself) steps on how to manage and take care of your industrial machinery:
Keep it in a clean and dry area
Always make sure that the storage area of your equipment for food industry companies is away from areas prone to moisture. Wet areas enable the formation of rust in your machines. Do not forget to use the cover provided during the purchase of the items. This will not only keep your device from being wet and inhibits moist but also to protect it from dust and other particles.
Clean it with a soft brush
If the machine is dusty and dirty, use a soft bristled brush to remove the dirt. You can also use compressed air in tin cans as an alternative to blow away the dusts that stuck on your equipment. It is not necessary to disassemble the parts of your attachments of milling machine machines just to clean it. Remember, there are small and very tiny spare parts there that you might lose if you are not an expert on mechanical field. If you think serious cleaning is needed, try to have it checked and cleaned in motorized shops.
Use right amount of oil and lubricants
Oil and lubricants are used to keep equipment for industry work well. Better follow the proper procedure and instruction in the manual given when you purchase your equipment. Do not put too much oil because residues from the oil will lead to grease that may lead to some accidents.
Buy quality parts
Do not use low quality parts that have not passed the standards. If the machine has defective parts, bring to the shop and let them fix it for you. If you think you can do the fixing, then make sure you have purchased an original and high quality parts to use. Do not be deceived by the parts offered at very low prices. Double check the quality before completely buying those new parts.
Industrial machinery maintenance is not really hard to do. You must have all the necessary information regarding the items and equipment you have purchased. Getting your machine to be maintained and fixed by professional might be costly, however, the guarantee is worth its price. If you have notice some failure on the performance of your machine do not pursue it to work, rather, check it carefully to avoid any possible hazards.
There is no need to panic when the machine …

Frame

Simple Do-It-Yourself Guide For Industrial Machinery Maintenance

master7 years ago06 mins

Often times, people purchasing things like equipment for supply chain management in mis, are having tough times on maintaining it to be in good condition, remain functional and last long. Due to the successive use of the industrial machinery, the performance of the machines can be deteriorated and eventually results in errors and faults. In general, if the machines are not maintained and kept well, productions and other company accomplishments can be compromised and can lead to huge amounts of expenses due to the failure of operations. To avoid this from being happening, below are some of the simple DIY (Do-It-Yourself) steps on how to manage and take care of your industrial machinery:
Keep it in a clean and dry area
Always make sure that the storage area of your equipment for industry is away from areas prone to moisture. Wet areas enable the formation of rust in your machines. Do not forget to use the cover provided during the purchase of the items. This will not only keep your device from being wet and inhibits moist but also to protect it from dust and other particles.
Clean it with how to drive a forklift like a pro a soft brush
If the machine is dusty and dirty, use a soft bristled brush to remove the dirt. You can also use compressed air in tin cans as an alternative to blow away the dusts that stuck on your equipment. It is not necessary to disassemble the parts of your machines just to clean it. Remember, there are small and very tiny spare parts there that you might lose if you are not an expert on mechanical field. If you think serious cleaning is needed, try to have it checked and cleaned in motorized shops.
Use right amount of oil and lubricants
Oil and lubricants are used to keep equipment for industry work well. Better follow the proper procedure and instruction in the manual given when you purchase your equipment. Do not put too much oil because residues from the oil will lead to grease that may lead to some accidents.
Buy quality parts
Do not use low quality parts that have not passed the standards. If the machine has defective parts, bring to the shop and let them fix it for you. If you think you can do the fixing, then make sure you have purchased an original and high quality parts to use. Do not be deceived by the parts offered at very low prices. Double check the quality before completely buying those new parts.
Industrial machinery maintenance is not really hard to do. You must have all the necessary information regarding the items and equipment you have purchased. Getting your machine to be maintained and fixed by professional might be costly, however, the guarantee is worth its price. If you have notice some failure on the performance of your machine do not pursue it to work, rather, check it carefully to avoid any possible hazards.
There is …

Wood

Electrical Maintenance – Do’s and Don’ts About Hiring Contractors

master7 years ago05 mins

Electrical maintenance contracts are often the source of irritation for many businesses. The standards of industrial electrical service can vary from excellent to not very good, and reliability is a natural issue. Good electrical maintenance contractors are in a very different league from the average. The best electrical maintenance contractors are easy to spot.
The Do’s- A checklist of requirements and questions for contractors
The most important thing about electrical maintenance is that it requires very high professional standards and knowledge, in any situation. Electrical systems require constant attention, and maintenance is often literally a life saver, preventing serious incidents.
The requirements milling machine labeled are fundamental:
-A comprehensive maintenance schedule and plan
-Clear coverage of all safety issues in relation modern machinery used equipment to installations, power and wiring
-An appropriate and concise business reporting methodology
-Full statutory compliance with regard to installing, repairing, and maintaining electrical systems
-When selecting a maintenance contractor it’s worth asking direct questions. The questions are equally relevant to the maintenance role:
In your opinion, what needs doing to upgrade our electrical systems?
This is an easy question to answer for a competent electrician. It’s also easy for even a non-electrician to check the answers, because it’s a known factor in the electrical system.
What scheduling plan do you think is appropriate for our business?
The answer is systematic, consistent scheduling of maintenance tasks. This is absolutely necessary, as well as best practice. Electrical systems must have regular checks, and parts replacement is very common on older systems.
Any questions you ask should receive clear, professional answers with an obvious level of knowledge of safety standards, best practice, and appropriate measures for dealing with system issues.
The Don’ts- Avoiding the pitfalls
The most serious issues with maintenance contracts are that problems might come to light as a result of serious incidents. Electrical maintenance is also a critically important part of business operations. Faults, downtime and hazards can be very expensive issues. “Corner cutting” by maintenance contractors can be one of the primary causes. This is where you see the difference between the real professionals and the very average electrical contractors.
The Don’ts are all practical:
Don’t tolerate any indications of inadequate service under contract. Faulty electrical systems can kill people and destroy businesses. Professional electrical maintenance contractors are well aware of their obligations, and even minor issues are very rare.
Don’t enter into a contract which doesn’t include performance standards and a performance management process. This is a potentially serious legal issue, if you need to take action in relation to the contract.
Don’t forget to conduct an independent audit of the maintenance of the electrical systems. A master electrician is the preferred auditor, and is fully qualified to assess quality standards.
Selecting the contractor
The best electricians are the people you need for your electrical maintenance. They have the knowledge base and the experience to deal with the most modern systems and know how to manage the old electrical systems.
The best electrical …