Tag: proper

0
Material Endurance

Guide to the Proper Selection and Sizing of Industrial Crushers

Crushers are machines that use impact, shear, compression or abrasion to reduce a variety of solid products to a desired particle size range.
DelumperA� brand crusher are crushers specifically built by Franklin Miller Inc. that are versatile, high end industrial crushers designed for processing such materials as chemicals, minerals, food, food ingredients, pharmaceuticals, grain, fertilizer, coal, soap and more.
Delumper crushers are used to reduce materials for further processing, eliminate blockages, break agglomerates down to their original particle size, and help in discharging bins and silos. They are also used to improve material flow properties and feeding of bulk and powders. The Pipeline model Delumper is used to enhance liquid flow, protect pumps, and enhance and expedite dissolving and mixing processes.
Delumper Crushers can reduce hard or soft, dry or wet, friable or sticky materials. The units are built for applications requiring precise outputs, superior fit and finish, resistance to corrosion or contamination, severe operating conditions, and applications requiring a high level of reliability.
The feed material (material being fed into the crusher) can be a solid, lump, chunk or agglomerate. Franklin Miller crushers are available in different models designed for dry, gravity or wet systems. The crushers can be either inline or open, stand-alone and conveyor-fed as part of a full system. These units can be supplied for low or high temperature environments as well as for pressurized or vacuum systems.
Material Plugging how to prevent equipment failure in Bins and Silos
Discharging powders and bulk solids from a bin or silo can often present a major problem resulting in lost production and high maintenance costs. Caking and even vessel failures can also result from these flow problems. The problem results when powders are conveyed into the vessel in a two-phase form. The material tends to agglomerate or build up on the vessel walls pack together.
The Solution
A common solution is the installation of a Delumper Crusher at the discharge. This unit attacks and breaks up the oversized solids that tend to plug the discharge. This works much like a sink disposal keeping the discharge clear of oversized lumps and chunks.
Crusher Selection
While crushing is governed by basic laws of physics, no single law or rule take the place of experience and testing in the selection and sizing of a suitable crusher for a given application. A number of factors go into the proper selection of a crusher for a given application including th following.
Here are some important criteria to consider in selecting a crusher:
1. Will the crusher handle the maximum required capacity to be processed without undue strain or overload?
2. Will the machine handle the maximum lump size of the infeed material?
3. Will the unit’s operating mechanism handle the properties of the material: i.e. friable, tough, sticky, abrasive?
4. Is the crusher design and construction suitable for the special application requirements such as resistance to corrosion, maintenance of purity or sanitary requirements?
5. Will the crusher produce the output particle size required?…

master
0
Material Endurance

Proper Handling of a Welding Gas Cylinder

Proper handling of gas cylinders is one aspect that usually gets overlooked in the welding industry. Most welding gases contain a combination of CO2, Argon, and Helium which are non flammable and non explosive but they can still be very harmful. If the cylinder gets knocked over causing the valve to be broken off, the exceedingly elevated pressure exiting from the cylinder can cause major harm to you, those around you, and any objects in the area.
Handling the cylinder properly should always be taken seriously. Accidents can happen in the blink of an eye and can cause permanent damage. The following are simple steps that can be employed when handling a gas cylinder.
Have a constant awareness of your surroundings at all times. If you are, transporting, removing from a machine or the cylinder is being stored, the cylinder ought to be forklift advantages firmly fastened. If appropriate, use a threaded cylinder cap when transferring the cylinder. This guards the valve lest the cylinder tips over or bumps into something.
There are a couple ways cylinders should be transported; the first is by using a cart. The second is by rolling the cylinder in its vertical position. The safest way is with the use of a cart which is intended exclusively for cylinders. Most carts include a chain or other restraint to secure the cylinder in place.
Always secure your cylinder with some sort of safety strap or chain while storing your cylinder weather you are storing it on or near your welder, or in a designated full/empty area. In addition, never use the cylinder as manufacturing machines list a storage hook for cables, MIG guns, power cords, welding torches. With the possibility of heat and the chance of arcs forming in combination with the cylinder can cause damage to the cylinder and be incredibly unsafe.
Every gas cylinder is intended to be used in a vertical position. Some cylinders hold liquid in addition to gas. Using the cylinder in a horizontal arrangement can permit the liquid within the cylinder to escape or seep out of the cylinder.
The single most important advice in handling a cylinder is use your common sense. It is extremely imperative for you to be certain what you are doing when operating all welding and cutting equipment. If you are not confident of a process please contact somebody who is knowledgeable. With the internet and all the other resources at your fingertips, the correct information is just seconds away.
Use caution at all times when handling welding gas. Everybody knows accidents can occur, so it is your responsibility to do your best in following any safety procedures. And remember; use common sense to keep you and all those around you safe. If a situation feels Unsafe, more often than not is. Take the time to ask somebody who is knowledgeable for help and keep the situation safe.…

master
0
Foundation

Choosing the Proper Auto Detailing Supplies

New car owners are very meticulous over the way their car looks and when they start to clean, they usually consider each and every part of the car and they make sure it is flawless. But everything does fade away eventually and in the course of the next few days, your car will probably lose its shine and its colors will start to wane. Whether we like it or not, the sun and the rain will start to batter your car’s paint job and pollution in the air and dust will start to cover up the shine.
When you feel like your car no longer looks as good as it did before, this is a good sign for you to start considering products for auto detailing and you better start looking for ones that will work best for your needs. Getting an auto detailing from an auto detailing shop can cost you the perfect competitor’s price is set by an arm and a leg, if you just want it for routine purposes, you can always save money and do the detailing job yourself. If you have decided on doing the job yourself, here are a couple of pointers that you might find very helpful in looking for the needed auto detailing supplies.
The first thing that you can do is to make a list of what your needs are. All items for your detailing task needs to be considered and everything from the towels to the cleaning agents and waxes need to be bought for best results and also to provide your car with adequate protection. Do not worry even if you’re spending a bit of money on your items since you will not be paying for other charges like man power and etc. anyway. The products you buy today can also be utilized when you want to clean up your car at a later date.
Try to buy things that are actually needed and not the items that you simply want to have. There are a lot of products out there and you might end up wanting to buy ones that are too expensive for your budget. Do not look for expensive products which might also be unnecessary for your car, and try to limit your search to things which are affordable and are beneficial. Look for the Auto detailing supplies that you need and read the labels as well as the components in every product you choose.
Look for auto detailing supplies at the right stores, there are a lot of stores out there but only a few are actually sellers of really effective products. individual supply and market supply Always look for newer products and always look for products which are effective and useful, always look for the best Auto detailing supplies for your car.…

master
0
Material Endurance

Proper Fish Tank Supplies Are Important For a Fish Keeping Hobby

Have you decided that you will have a fish tank at your home which will display a collection of beautiful fish? Whether you want to keep saltwater fish or freshwater fish, you first decide on the type of tank you want to buy. Then you should think about all other extras which are needed. While buying for the first time, you should give a careful thought to many factors. Here are some guidelines which can help you.
Buying any tank from the pet fish shop or from any on-line website is not enough. After all, fish tank is a basic item. It is required but not sufficient. You should also think of the accessories which will be required to maintain such tank. In fact the accessories are equally important. There are some species of fish which cannot live a healthy and happy life without proper supplies. There is a long list of supplies which are required for a tank but important ones amongst them are lights, heaters, chillers, filtration systems and cleaning supplies. There are other supplies which are also important but the above supplies are required for any type of tank.
It is natural that you are not aware of the supplies available in the market. So it is better to do a little research on-line to find out what is available. There arbor in milling machine are fish-keeping guides or books available on-line which can be an important source for you. The pet store owner in your area will also be able to help you.
After deciding to buy the supplies, you will find a number of options available. There are many brands and companies which are selling the supplies. To avoid confusion, concentrate on two or three options and then consider the advantages and disadvantages of each of them. You may write them down for you understanding. Once you do this homework, the buying decision becomes easy.
The pet fish shop owner in your area will be able to help you with the required accessories but you should also consider product management process ppt the option of buying them directly from the manufacturer. You can get a better price and your options are also wider.
There are a lot of websites which are offering these supplies on-line. They will also offer a wide range. The rates quoted by on-line suppliers are always lower than the pet fish shop because they avoid many expenses of maintaining the store.
When you finally decide on the supplier, check the details about the warranties as well as terms of delivery. Many on-line companies will offer free shipment if you order above a certain amount. The warranties can also be extendable for a longer time with some special deals. All these things look small but they are important in long term.
Many beginners just buy something to start with. They may not have enough accessories to perform the routine maintenance. The fish they bought require a little more attention in the beginning. …

master
0
Frame

Guide to the Proper Selection and Sizing of Industrial Crushers

Crushers are machines that use impact, shear, compression or abrasion to reduce a variety of solid products to a desired particle size range.
DelumperA� brand crusher are crushers specifically built by Franklin Miller Inc. that are versatile, high end industrial crushers designed for processing such materials as chemicals, minerals, food, food ingredients, pharmaceuticals, grain, fertilizer, coal, soap and more.
Delumper crushers are used to reduce materials for further processing, eliminate blockages, break agglomerates down to their original particle size, and help in discharging bins and silos. They are also used to improve material flow properties and feeding of bulk and powders. The Pipeline model Delumper is used to enhance liquid flow, protect pumps, and enhance and expedite dissolving and mixing processes.
Delumper Crushers can reduce hard or soft, dry or wet, friable or sticky materials. The units are built for applications requiring precise outputs, superior fit and finish, resistance to corrosion or contamination, severe operating conditions, and applications requiring a high level of reliability.
The feed material (material being fed into the crusher) can be a solid, lump, chunk or agglomerate. Franklin Miller crushers are available in different models designed for dry, gravity or wet systems. The crushers can be either inline or open, stand-alone and conveyor-fed as part of a full system. These units can be supplied for low or high temperature environments as well as for pressurized or vacuum systems.
Material Plugging in Bins and Silos
Discharging powders and bulk solids from a bin or silo can often present a major problem resulting in lost production and high maintenance costs. Caking and even vessel failures can also result from these flow problems. The problem results when powders are conveyed into the vessel in a two-phase form. The material tends to agglomerate or build up on the vessel walls pack together.
The Solution
A common solution is the installation of a Delumper Crusher at the discharge. This unit attacks and breaks up the oversized solids that tend to plug the discharge. This works much like a sink disposal keeping the discharge clear of oversized lumps and chunks.
Crusher Selection
While crushing is governed by basic laws of physics, no single law or rule take the place of experience and testing in the selection and sizing of a suitable crusher for a given application. A number of factors go into the proper selection of a crusher for a given application including th following.
Here are some important criteria to consider in selecting a crusher:
1. Will the crusher handle the maximum required capacity to be processed without undue strain or overload?
2. Will the machine handle the maximum lump size of the infeed material?
3. Will the unit’s operating mechanism handle the properties of the material: i.e. friable, tough, sticky, abrasive?
4. Is the crusher design and construction suitable for the special application requirements welding supply sapulpa such as resistance to corrosion, maintenance of purity or sanitary requirements?
5. Will the crusher produce the output particle size required?
6. Will …

master